Ultra electronic 300plus quick start Limited Warranty Information

Page 42

Quick Start Guide

Ultra Electronics Card Systems

Limited Warranty Information

1)Coverage: Ultra Electronics Ltd Warrants that the MAGICARD printer shipped with this Warranty statement will conform to the manufacturers specifications and be free from defects in materials or workmanship for a period of 12 months from the date of original purchase by the user, but there are additional conditions on the printhead Warranty (see para 2).

2)Limited Printhead Warranty: Ultra warrants that, under normal use and service, thermal printheads will be free from defects in material and workmanship for a period of twelve (12) months from the date of original purchase or for a quantity of 40,000 printed cards, whichever comes first, provided that Ultra-approved card media is utilised. If a Warranty claim is submitted for a defective printhead, Ultra will have the right to inspect the printhead and samples of the printed and blank ID cards used with it for the purpose of verifying that the claimed defect has not been caused by non-Ultra approved media, or by foreign particles or substances which have caused chemical or physical damage. Ultra's decision in any such claims shall be final.

3)Warranty Claims: If the MAGICARD printer proves defective during this period, please contact the Ultra Service Center, at the address and telephone/fax number given below. The Ultra Service Center personnel may first ask you to carry out certain simple checks to confirm the nature of the problem, and if a return is appropriate they will give you a Return Authorisation Number and consignment instructions to the appropriate repair center. Ultra will, at its option, repair or replace the defective parts at no charge to the customer.

4)Warranty Limitations: The Warranty does not apply to MAGICARD printers that have been:

Damaged through physical or electrical mishandling.

Damaged through operation in environments which are outside normal office conditions in terms of corrosive atmosphere, temperature, humidity, shock or vibration.

Improperly installed or interfaced to other products which may exhibit software problems or expose the MAGICARD to improper voltages or control signals.

Fitted with dye film rolls from any source other than Ultra Electronics, or have been used to print on anything other than card surfaces which are approved by Ultra and which will generally be made of PVC, be completely flat, and be free of harmful particles or substances.

Serviced or interfered with by anyone other than an Ultra Authorised Service provider.

5)Shipping: Insurance and shipping costs incurred in sending the MAGICARD printer for Warranty service are the responsibility of the customer. Whenever possible Ultra Service Centers will use the same class of shipping service selected and paid for by the customer to return the printer. Return shipping costs from Ultra to the customer will be at Ultra's expense. After obtaining the Return Authorisation Number as described above, the printer should be securely packed in its original packaging with proof of date of purchase and a note describing the problem and quoting the Return Authorisation Number. The printer must be sent to the service center address supplied with the Return Authorisation Number by the main service center. This address may be different to the address listed below, but will generally be closer to you. Please also mark the Return Authorisation Number on the outside of the shipping carton.

6)Applicability: The Warranty and remedy provided above are exclusive and in lieu of all other warrants, either express or implied, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. Any statements or representations made by any other person or firm are void.

Neither Ultra Electronics Ltd nor its affiliates shall be liable for any loss, inconvenience, or damage, including direct, special, incidental, or consequential damages, resulting from the use or inability to use the Ultra product, whether resulting from breach of Warranty or other legal theory even if Ultra has been advised of the possibility of such damage or loss.

This Warranty is governed by the laws of England. Any dispute arising out of or relating to this Warranty shall be submitted for arbitration of this dispute or disputes pursuant to the rules and regulations of the UK Arbitration Act.

This Warranty gives you specific legal rights, and you may also have other legal rights which vary from country to country so the above limitations and exclusions may not apply to all customers.

For Warranty enquiries please call or fax our Warranty Service Manager:-

Ultra Electronics Limited

MAGICARD Service Center

Waverley House

Hampshire Road

Granby Estate

Weymouth

Dorset, DT4 9XD, U.K.

Tel: +44 (0)1305 784738

Page 42

MAGICARD Color Printer

Image 42 Contents
Magicard 300 Color Printer Magicard 300plus Magicard SprinterLoad the supplied Windows Driver software Verify computer-to-printer operationConventions Page Preparing a Location For the Printer Location Requirements for your printerTop Cover Removing the Printer From the Box Checking Package Contents C Quick Start Guide Ultra Electronics Card Systems Install Dye Film D Quick Start Guide Ultra Electronics Card Systems Ultra Electronics Card Systems Quick Start Guide Load Plastic Cards 545 Connect the Printer To a Power Supply Test Printer Operation G Internal software version is printed on the test card Install the parallel Interface Cable H and Ultra Secure Key Install Windows Driver Procedure to be followed if your PC uses Windows 3.1 orUltra Electronics Card Systems Quick Start Guide Quick Start Guide Ultra Electronics Card Systems Press the Set as Default Printer button Install Windows Driver Iy Procedure to be followed if your PC uses Windows∙ Select the Next button ∙ Select the Have Disk button Quick Start Guide Ultra Electronics Card Systems Ultra Electronics Card Systems Quick Start Guide Quick Start Guide Ultra Electronics Card Systems Printer Setup Printer SetupStandard Magicard Color Printer Quick Start Guide Ultra Electronics Card Systems Overcoat Magicard Color Printer Colour Adjust Parallel Port Configuration Verifying Computer to Printer Communication in Windows Check the Installation Case DifficultyFor Further Assistance Important Cleaning Procedures M Thermal Printhead CleaningCleaning the Tacky Roller Cleaning the Rubber RollersQuick Start Guide Ultra Electronics Card Systems Cleaning the Optics Cleaning the Magnetic Head if fittedLED Error Codes N Canadian Department of Communications Statement Limited Warranty Information Fax +44 01305 Safety EC Declaration of Conformity