Ultra electronic 300plus quick start Printer Setup

Printer

J Setup

Printer Setup procedure to be followed if the default setting differ from your requirement:

Printer Setup

Changes to the printer setup options performed via the Control Panel are non-volatile, until subsequently changed, even though the PC may be switched off after use. Most software applications provide the means to change the printer setup but be warned - these settings may prove to be volatile with some applications and your settings may be lost. Play safe and use the Control Panel.

For WINDOWS 3.x

∙Start WINDOWS and in the MAIN group, select and open the CONTROL PANEL window.

∙Select and open the PRINTERS icon.

∙The PRINTERS dialog box appears.

∙Highlight the PrintMagic MAGICARD Printer Driver and from the Options menu, select

PRINTER SETUP.

∙The PrintMagic Printer Setup window appears, which has six pages, any of which may be viewed by clicking on the appropriate tab.

For WINDOWS 95

∙Go to the "My Computer" folder.

∙Double Click on the Printers folder.

∙Double Click the PrintMagic MAGICARD Printer icon.

∙Select "Printer" from the menu and go to Properties.

∙Select the Details tab.

∙Select the Setup button.

Setup Options

The PrintMagic™ printing system is designed to provide the best print output default settings for your printer. If you need to alter the default settings, the PrintMagic™ printer driver provides you with easy-to-use tab dialog boxes.

Along the bottom of the setup dialog boxes is a row of four Pushbuttons, OK, Cancel, Defaults and Help.

Initialise the Setup

Initialise the setup by pressing the Default pushbutton.