PSC manual Programming the QS2500, Scan the alphanumeric characters located in Appendix E

Programming the QS2500

To program the QS2500, you must scan a series of programming bar codes in the correct order. The inside back cover of this manual contains a table of alphanumeric bar codes needed to program the various options.

To program each option:

1.	Scan the Start Program bar code above the list of options (see the
	table below).
2.	Enter the option mode by scanning the Option bar code.
3.	Find the alphanumeric entry for the option setting you want, and
	scan the alphanumeric characters located in Appendix E.
	Auto-detect - the scanner can automatically detect
	the interface hardware for all interfaces except Wand
	Emulation.
NOTES	IBM interfaces - must be selected individually
	depending on the port used. Refer to IBM Interface
	(46XX/USB) on page 13.
4.	Scan the Store Settings bar code in Appendix E.
5.	Scan the Exit bar code.
	A software utility, Configurator Express, is also available for pro-
	gramming and configuring the QS2500. Refer to the Readme file
NOTES	on the QS2500 product CD for additional information.

Disabling the Code 39 symbology will disable the scanner’s capability to read the bar code labels in this manual.

CAUTION

Product Reference Guide 3