Raymarine Radome Scanners manual Display software version, Warranty Handbook information

Page 7

Important information

3

 

 

Display software version

For operation of your scanner, the display unit requires the appropriate software version. These are:

•E Series displays - Version 3.03 or later.

•C Series displays - Version 3.01 or later.

The software version can be confirmed by switching on the display and checking the version number during the magnetron warm-up sequence. However, if a scanner is not connected to the display, the version number will only be displayed for 10 seconds.

Warranty

To register your new Raymarine product, please take a few minutes to fill out the warranty card. It is important that you complete the owner infor- mation and return the card to receive full warranty benefits. Alternatively you can register your product on line at www.raymarine.com

Handbook information

The technical and graphical information contained in this handbook, to the best of our knowledge, was correct as it went to press. However, our policy of continuous improvement and updating may change product specifica- tions without prior notice. As a result, unavoidable differences between the product and handbook may occur from time to time.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Radome Scanners Trademarks and registered trademarks Contents Radome Scanners Users Guide Radio Frequency Radiation Hazard Safety noticesIntroduction Intended useDeclaration of conformity Waste Electrical and Electronic Equipment DirectiveEMC conformance FCC NoticeDisplay software version Warranty Handbook informationRadome Scanners Users Guide Suppression ferrite EMC installation guidelinesConnections to other equipment What’s in the box? What tools do I need to install the scanner?Radome scanner How big is the scanner?Planning the installation Inter-unit cables Cable requirementsScanner cables Running the cable to the scannerExtending the power cable Power cablesPower requirements Ext Extending the power cableLight Light +Heavy + +5 m extMounting platform Mounting options Preparing the mounting holesSecuring the scanner to the mounting platform Connecting the inter-unit cable to the scanner Do not Overtighten Completing the installationDisplay connections Power connectionsEMC conformance Scanner setupInter-unit cable connections Before you go to seaSwitch on and initial set up Set up, alignment and timing checksRadome Scanners Users Guide Introduction MaintenanceTroubleshooting Problem SolutionEurope Technical support United StatesTransmitter GeneralReceiver AntennaRD424 24Radome scanner unit Polarization Horizontal Rotation Rate Rpm nominal Obtaining Warranty Service Limited warrantyRaymarine Inc Other conditions Limitations and ExclusionsOnboard warranty Product warrantyWarranty limitations

Radome Scanners specifications

Raymarine Radome scanners are an essential component for maritime navigation, providing boaters and marine enthusiasts with reliable radar technology. These radar systems are known for their durability, efficiency, and advanced performance, making them a popular choice for both commercial and recreational vessels.

One of the standout features of Raymarine Radome scanners is their compact and lightweight design. This makes them particularly suitable for smaller boats where space can be a concern. Despite their size, these scanners deliver impressive range and resolution, ensuring accurate detection of other vessels, landmasses, and weather phenomena.

The technology employed in Raymarine Radome scanners includes patented CHIRP Pulse Compression, which enhances target separation and improves the ability to distinguish between close and distant targets. This leads to clearer images and more reliable data, ensuring operators can make informed decisions while navigating.

Another significant characteristic of these radomes is the advanced signal processing capabilities they offer. The radar systems can filter out clutter, such as waves and rain, to provide clear representations of objects that matter, thus reducing false alarms and enhancing situational awareness. The integration of digital signal processing (DSP) allows for adaptive gain control, which optimizes performance under varying environmental conditions.

Raymarine Radome scanners are also designed to be user-friendly. The intuitive interface LCD displays or integration with multifunction displays allow for easy operation and access to critical navigation information. Users can customize their radar settings to suit their specific needs, which enhances usability and reduces the likelihood of operator error.

Many models also feature advanced maritime safety features such as MARPA (Mini Automatic Radar Plotting Aid), which tracks moving targets and provides information on their course and speed. This technology is vital for collision avoidance and ensures a safer boating experience.

In terms of compatibility, Raymarine Radome scanners seamlessly integrate with other Raymarine systems, creating a cohesive network of navigation tools. This compatibility allows users to layer radar data with charts and other navigational information, offering a holistic view of their surroundings.

In summary, Raymarine Radome scanners are characterized by their compact design, advanced technologies, and user-friendly interface. The combination of features such as CHIRP technology, digital signal processing, and safety enhancements make them a top choice for anyone looking for precision and reliability in maritime navigation. Whether for commercial use or recreational boating, these radar systems stand out for their performance and quality.
Top Page Image Contents