2.Open your label application and open your label file.
3.Select Print within the application. (The Rimage CD Designer application's FilePrint function is used in the sample screen below.)
4.Set the printer name to Disc Color Printer if that is not the default printer.
5.Set the number of copies if necessary, and then select OK. The Liberty printer Power LED will flash within a few seconds, and the printer tray comes out.
6.Place the disc you want to print on the printer tray so that the printable surface is facing up. The three holding pins must come up through the disc center hole.
1 – Printer Tray
2 – Disc
3 – Holding Pins
12