Maintenance, Run Masker | Rimage 110705-000 specs

Run Masker

The Rimage Raster Masker displays allowing you to adjust the mask (non-printable area) settings for the selected media type (Standard CD/DVD 120 mm only). This works well when you do not want the edges printed. If you print on the edges of a disc where there is not printable surface, the ink will smear or run.

Standard Area Settings let you adjust the standard outer and inner diameter settings, etc.

Hub Settings let you select the Print On Hub feature and adjust the related outer and inner diameter settings.

Parameter Unit lets you switch between a unit of measure of times 1.0 mm or times 0.1 mm.

Maintenance

The maintenance section allows you to select alignment functions, diagnostics, or update the flash.

Center Image – The Center Image function is only required if the printed image is not centered on the label. Directions are found on the next page.

Align Cartridges – directions are found on page 14. Diagnostics – directions are found on page 27.

Update Loader Flash – Do not use. This function is not supported on standalone Liberty Printers.

Clean Cartridges – Cleans the ink jet nozzles when the jets are dried out. Refer to page 27.