5.3. EMULATION STAR SP200
Command | Hex Code | Description | |
BEL | <07>H | Differed drive command “A” for peripheral unit | |
(Default setting) | |||
|
| ||
CAN | <18>H | Cancel print data in buffer | |
LF | <0A>H | Line feed | |
CR | <0D>H | Line feed (same as LF) | |
SO | <0E>H | Select expanded character mode | |
SI | <0F>H | Cancel expanded character mode | |
FS | <1C>H | Immediate drive command “B” for peripheral unit 1 | |
DC4 | <14>H | Cancel expanded character mode | |
ESC BEL | <1B>H<07>H<n1><n2> | Adjust drive pulse width for peripheral unit | |
n1 n2 | (Default setting) | ||
| |||
|
|
| |
ESC @ | <1B>H<40>H | Initialize printer | |
ESC M | <1B>H<4D>H | Select 7 x 7 (Half dots) character size | |
(Default setting) | |||
|
| ||
|
|
| |
ESC R n | <1B>H<52>H<n> | Select international character set | |
ESC P | <1B>H<50>H | Select 9 x 7 (Half dots) character size | |
ESC W 1 | <1B>H<57>H<31> | Select expanded character mode | |
H<1B>H<57>H<1> | |||
|
| ||
ESC W 0 | <1B>H<57>H<37> | Cancel expanded character mode | |
H<1B>H<57>H<0> | |||
|
| ||
ESC a n | <1B>H<61>H<n> | Feed paper n lines |
10