TVS electronic RP-3180 user manual ESC 3 n, ESC 9 m n 1 n2, ESC a n

[Details]	If the values of m is out of the specified range, n1 and data
	following are processed as normal data.
	The n1 and n2 indicate the number of dots of the bit image in the
	horizontal direction.
	The number of dots is calculated by n1 + n2 x 256.
	If the bit-image data input exceeds the number of dots to be
	printed on a line, the excess data is ignored.
	d indicates the bit-image data. Set a corresponding bit to 1 to print
	a dot or to 0 to not print a dot.
	After printing a bit image, the printer returns to normal data
	processing mode.
	This command is not affected by print modes (emphasized,
	double-strike, underline,character size or white/black reverse
	printing), except upside-down printing mode.
ESC 2
[Name]	Select default line spacing
[Format]	ASCII	ESC	2
	Hex	1B	32
[Description]	Decimal	27	50
	Selects approximately 4.23 mm {1/6"}spacing.
[Details]	The line spacing can be set independently in standard mode and in
[See Also]	page mode.
	ESC 3
ESC 3 n
[Name]	Set line spacing
[Format]	ASCII	ESC	3	n
	Hex	1B	33	n
[Range]	Decimal	27	51	n
	0 n	255
[Description]	Sets the line spacing to [n x vertical or horizontal motion unit].
[Details]	The line spacing can be set independently in standard mode and in
	page mode.
	In standard mode, the vertical motion unit (y) is used.
	The maximum paper feed amount is 1016 mm {40"}. Even if a paper
	feed amount of
	more than 1016 mm {40"}is set, the printer feeds the paper only
[Default]	1016 mm {40"}.
	Approx 4.23mm {1/6"}.
[See Also]	ESC 2

RP-3180 USER'S MANUAL 15

ESC 9 m n 1 n2

[Name]	Generating the specified pulses
[Format]	ASCII	ESC	9	m	n1	n2
	Hex	1B	39	m	n1	n2
[Range]	Decimal	27	57	m	n1	n2
	m = 0, 0	n1 255 , 0		n2	255
[Description]	The signals specified by			n1	and n2	are output to the connector
	pin specified by m .
ESC @
[Name]	Initialize printer
[Format]	ASCII	ESC	@
	Hex	1B	40
	Decimal	27	64
[Description]	Clears the data in the print buffer and resets the printer mode to the
	mode that was in effect when the power was turned on.
[Details]	The data in the receive buffer is not cleared.
	The macro definition is not cleared.
	The NV bit image data is not cleared.
	The data of the NV user memory is not cleared.
ESC A n
[Name]	Set line spacing
[Format]	ASCII	ESC	A	n
	Hex	1B	41	n
[Range]	Decimal	27	65	n
	0 n	255
[Description]	Sets the line spacing to [n x vertical or horizontal motion unit].
[Details]	The line spacing can be set independently in standard mode and in
	page mode.
	In standard mode, the vertical motion unit (y) is used.
	The maximum paper feed amount is 1016 mm {40"}. Even if a
	paper feed amount of more than 1016 mm {40"}is set, the printer
[Default]	feeds the paper only 1016 mm {40"}.
	Approx 4.23mm {1/6"}.
[See Also]	ESC 2
ESC D
[Name]	Select character Double-height mode
[Format]	ASCII	ESC	D
	Hex	1B	44
[Description]	Decimal	27	68
	Select character Double-height mode.

RP-3180 USER'S MANUAL 16