TVS electronic RP-3180 user manual Specification, Print Control Command, Command List, Mtbf, Mcbf

Chapter 7.Specification

Printing method	Thermal line printing
Dot density	203 dpi	203 dpi ( 8		8 dots/mm)
Printing width	72 mm {2.83"}, 576 dot positions
Characters per line	48 (default) or 72
Character size	1.25	3.00 mm
Number of characters	Alphanumeric characters: 95
Print speed	Approx. 150 mm/s {5.9"/s} max.; 47.2 lps, max.
	(3.18 mm {1/8"} feed); 35.5lps, max. (4.23 mm
	{1/6"} feed, at 24 V, 28 {82				}, density level 1).
	Speed is adjusted automatically depending on the
	voltage applied andhead temperature.
Paper feed speed	Approx. 180 mm/s
	continuous paper feed
Line spacing (default)	4.23 mm {1/6"}
Character structure	12 x 24 o r 9 x 17
Paper roll (single-ply)	Size: Width: 79.5 mm			0.5 mm {3.13" 0.02"}
	Maximum outside diameter: 83 mm {3.26"}Paper
	roll spool diameter: Inside: 12 mm {0.47"};
	Outside: 18 mm {0.71"}
Interface (compatible)	RS-232C/Bi-directional parallel / USB (OPTION)
Receive buffer	28KB
Power supply	+ 24 VDC		10%
Life	Mechanism: 15,000,000 lines
	Thermal head: 100 million pulses, 100 km
	Autocutter: 1,500,000 cuts
MTBF	360,000 hours
MCBF	52,000,000 lines
Temperature	Operating: 5		~ 45	{41	~113	}
	Storage: -10		~ 50	{14	~122	},
	except for paper
Humidity	Operating: 10 to 90% RH
	Storage: 10 to 90% RH, except for paper
Overall dimensions	145(W)	192(D) 142(H)mm
Weight (mass)	Approximately:2kg

RP-3180 USER'S MANUAL 11

Chapter 8.PRINT CONTROL COMMAND

8-1 Command List

No.	Command	Description	Hexadecimal Code	Page
1	LF	Printing and paper feed	<0A>	13
2	CR	Back to printing	<0D>	13
3	ESC !	Select print mode	<1B><21><n>	13
4	ESC *	Specifying the bit image mode	<1B><2A><m><n1><n2>d1...dk	14
5	ESC 2	Specifying 1/6-inch line feed rate	<1B><32>	15
6	ESC 3	Setting line feed rate of minimum pitch	<1B><33><n>	15
7	ESC 9	Generating the specified pulses	<1B><39><m><n1><n2>	16
8	ESC @	Initializing the printer	<1B><40>	16
9	ESC A	Set line spacing	<1B><41><n>	16
10	ESC D	Select character Double-height mode	<1B><44>	16
11	ESC H	Select character Double-height mode	<1B><48><n>	17
12	ESC I	Select character Double-height mode	<1B><49>	17
13	ESC J	Printing and feeding paper in	<1B><4A><n>	1728
		minimum pitch
14	ESC L	Selecting page mode	<1B><4C>	17
15	ESC V	Printing bit image	<1B><56><n1><n2>d1...dk	18
16	ESC W	Defining the print area in page mode	<1B><57><xL><xH><yL><yH>	1829
			<dxL><dxH> <dyL><dyH>
17	ESC X	Select character Double-width mode	<1B><58><n>	19
18	ESC d	Printing and feeding the paper by	<1B><64><n>	2030
		n lines
19	ESC I	Full cut	<1B><69>	20
20	ESC j	Printing and feeding paper in	<1B><6A><n>	2032
		minimum pitch
21	ESC m	Partial cut	<1B><6D>	21
22	ESC p	Generating the specified pulses	<1B><70><m><n1><n2>	21
23	ESC M	Select character fonts	<1B><4D><n>	21
24	GS !	Select character size	<1D><21><n>	22
25	GS *	Defining the download bit image	<1D><2A><n1><n2>d1...dk	23
26	GS /	Printing the downloaded bit image	<1D><2F><m>	23
27	GS V	Cutting the paper	(1)<1D><56><m>	24
			(2)<1D><56><m><n>
28	GS v 0	Printing of raster bit image	<1D><76><30><m><xL><xH>	2536
			<yL><yH>d1...dk
29	GS h	Specifying the height of the bar code	<1D><68><n>	26
30			(1)<1D><6B><m>d1...dk<NUL>	37
	GS k	Printing the bar code		26
			(2)<1D><6B><m><n>d1...dk
31	FS p	Print NV bit image	<1C><70><n>	27
32	FS q	Define NV bit image	<1C><71><n>	38
				28

RP-3180 USER'S MANUAL 12