Pride Mobility 6000 manual P E N D I X I Specification S, Specifications

A P P E N D I X I - S P E C I F I C A T I O N S

	SPECIFICATIONS
Suspension:	Active-Trac ATX with integrated rear dual-strut suspension and articulating caster beam
Drive Wheels:	Quantum 6000 Series: 14 in. (35.56 cm), pneumatic or solid available
	Quantum 6000XL Series: 14 in. (35.56 cm), solid
Caster Wheels:	Front: 5 in. (12.7 cm) solid
	Rear: 6 in. (15.25 cm) solid
Maximum Speed:¹	Quantum 6000 and 6000XL Series: Up to 6.5 mph (10.46 km/h)
	Quantum 6400 Series: Up to 8 mph (12.87 km/h) with High Speed Option
Range:¹, 4	Quantum 6000 and 6400 Series: Variable up to 17 miles (27 km)
	Quantum 6000XL Series: Variable up to 14 miles (22 km)
Brakes:	“Intelligent Braking” electronic regenerative, disc park brake
Ground Clearance:²	See figure 28.
Turning Radius:²	See figure 28.
Overall Size:²	Length: See figure 28.
	Width: See figure 28.
Drivetrain:	Two motor, Mid-wheel-6 drive
Batteries:³	Quantum 6000, 6400 and 6000XL Series: Two 12-volt, deep-cycle Group 24 batteries
	Quantum 6000 and 6400 Series: Two 12-volt, NF-22 required with Power Elevating Seat
	Quantum 6000, 6400 and 6000XL Series: Two 12-Volt Group 34 batteries required with TRU-
	Balance Power Positioning
Battery Charger:	8-amp, off-board
Weight Capacity:	Quantum 6000 and 6400 Series: 300 lbs. (136 kg)
	Quantum 6000XL Series: 400 lbs. (181 kg)
	Quantum 6000, 6400 and 6000XL Series: 160 lbs. (72.57 kg) with Synergy Manual Tilt
Component Weights:	Base: 170 lbs. (77 kg)
	Batteries: 53.5 lbs. (24.26 kg) each

¹Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller type, tire type, and tire condition. This specification is subject to a variance of (+ or - ) 10%.

²Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of

(+ or – ) 3%.

³AGM or Gel-Cell type required. See VI. “Batteries and Charging.”

4Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoret- ical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity.

NOTE: This product conforms to all applicable ANSI/RESNA testing requirements and ISO 7176 Series EN12184 standards. All specifications subject to change without notice.

42 www.pridemobility.com Quantum 6000 Series