Tributaries PWRI-PRO owner manual Important Safety Instructions Please Read this First, English

Page 3

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ THIS FIRST!

Your TRIBUTARIES® PWRI-PRO In-Wall Power Management Outlet represents the latest in power management and surge suppression technology. However, like any electronic device, if inappropriately or improperly installed it may not perform as intended. By following a few common sense precautions, your Power Management product will give you a lifetime of worry-free performance.

The following safety precautions apply to this and all TRIBUTARIES® Power Management Products.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. To reduce the risk of electric shock, do not attempt to open casing. There are no user-serviceable parts inside.

GENERAL

•Please read the safety instructions in this owner’s manual prior to operating the PWRI-PRO.

•Keep these safety instructions for future reference when operating the PWRI-PRO.

•Heed all warnings contained in this operation manual.

•Follow all instructions.

•Warning: to reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

•Only use accessories specified by TRIBUTARIES®

INSTALLATION

•This product must be installed by a licensed electrician in accordance with the National Electrical Code.

•The TRIBUTARIES PWRI-PRO is designed for installation in 15 amp / 125 volt circuits only.

•Heat: Do not place the PWRI-PRO near any heat sources such as radiators, heat registers, stoves, A/V receivers or amplifiers that produce considerable amounts of heat.

•Water and moisture: Do not use the PWRI-PRO near water, such as a bathtub, washbowl, or swimming pool.

•Cleaning: Clean the PWRI-PRO only with a dry cloth.

ELECTRICAL POWER

•Power Sources: The PWRI-PRO is rated for use with only 125 volt / 15 amp circuits.

•Install with a minimum of 14 AWG building (e.g. Romex) electrical wire.

•Do not overload wall outlets as this can result in a risk of fire or electric shock.

REPAIR OF EQUIPMENT

•Do not attempt to service the PWRI-PRO. Refer all servicing to qualified service personnel. Servicing is required when the PWRI-PRO has been damaged in any way, such as being exposed to rain or moisture, or LEDs do not illuminate when connected to main electrical service.

•No User Serviceable Parts Inside. If, for any reason, your TRIBUTARIES® PWRI-PRO is not operating properly, do not attempt to open casing for repair. Turn off the circuit breaker feeding electric power to the outlet and consult this owner’s manual for warranty and service information.

•When replacement is required, be sure the service technician is a licensed electrician.

•Upon completion of any service, ask the electrician to perform safety checks to determine that the product is in proper operating condition prior to use.

•If you have any difficulty operating the PWRI-PRO, please refer to the warranty information contained in this owner’s manual.

•Please read and observe the following safety points at all times.

WARNING! Servicing: There are no user-serviceable parts inside an In-Wall Power Manager product. Please contact an authorized TRIBUTARIES® dealer for information on service and repairs.

2

ENGLISH

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Pwri -PRO Pwri -PRO Table of ContentsEnglish Important Safety Instructions Please Read this FirstFront Panel Features Rear Panel FeaturesEnglish Introduction and Product Overview Features and Technologies English Installation Overview Package ContentsRepair of Equipment TroubleshootingSymptom Possible cause Solution Care of EquipmentWhat Tributaries Will Do Under the Warranty English PWRI-PRO Technical SpecificationsThree Year Limited Warranty Scope and Duration of WarrantyWhat the Owner Must Pay For What the Owner Must Do to Obtain Service Under This WarrantyFelicitations Table DES MatieresFrench Alimentation ElectriqueReparation DE L’EQUIPEMENT Presentation ET VUE D’ENSEMBLE DU Produit French Caracteristiques Panneau AvantCaracteristiques Panneau Arriere Caracteristiques ET Technologies Connectez LA Prise DE Sortie PWRI-PRO French VUE D’ENSEMBLE DE L’INSTALLATIONInstallez LE Boitier DE LA Prise DE Sortie Contenu DE L’EMBALLAGEReparation DE L’EQUIPEMENT Symptômes Cause possible SolutionsDepannage Soin DE L’EQUIPEMENTFrench Caracteristiques Techniques ¡FELICITACIONES Tabla DE ContenidosGeneral Spanish Introducción Y Vista General DEL ProductoCaracterísticas DEL Panel Frontal Características DEL Panel TraseroSpanish Características Y Tecnologías Conectar Salida PWRI-PRO Contenidos DEL PaqueteVista General DE LA Instalación Instalar Caja DE SalidaReparación DEL Equipamiento Spanish Resolución DE ProblemasProblema Causa posible Solución Cuidado DEL EquipamientoEspecificaciones

PWRI-PRO specifications

Tributaries PWRI-PRO is a forward-thinking line of audio and video interconnects designed for the audiophile and videophile communities. These cables are crafted to deliver exceptional signal quality while maintaining the integrity of audio and video source materials. One of the main features of the PWRI-PRO series is their advanced construction, which utilizes high-purity materials and innovative technologies to minimize signal loss and maximize performance.

The PWRI-PRO series cables are built with high-quality oxygen-free copper, which plays a vital role in reducing resistance and enhancing conductivity. This is vital for those who demand the highest fidelity from their audio and video systems. Furthermore, the cables are double-shielded to protect against electromagnetic interference and radio frequency interference, which can compromise the quality of the transmission. This shielding ensures that the cables maintain optimal performance even in environments with high electronic noise.

Another unique characteristic of the PWRI-PRO series is the use of proprietary connectors. These connectors are designed to provide a secure, low-resistance connection that can withstand the rigors of frequent use. Their design also ensures that the cables can be easily connected and disconnected without degrading the connectors over time.

In terms of technology, the PWRI-PRO interconnects feature precision-engineered geometry that minimizes crosstalk and other disturbances in the signal path. This allows for a clearer, more defined soundstage and prevents the muddiness that can occur with lesser quality cables. Additionally, the series offers a variety of cable types, including balanced and unbalanced options, making it suitable for a wide range of audio and video applications.

The PWRI-PRO series is not only about performance but also about aesthetic appeal. The cables are available in several lengths and finishes, catering to varied setups and allowing users to integrate them seamlessly into their systems. The build quality is robust, ensuring durability while maintaining a sleek and professional appearance.

Overall, Tributaries PWRI-PRO stands out in the competitive world of audio and video cables thanks to its combination of high-end materials, advanced technology, and thoughtful design features. For audiophiles and videophiles seeking to elevate their listening and viewing experiences, the PWRI-PRO series is an exceptional choice that promises reliability and top-tier performance.
Top Page Image Contents