Installation

NOTE: If you are updating from an older version of CoPilot®, you will need to uninstall the older version first. Refer to the Uninstalling section, pages 7-8.

To install CoPilot, first turn on your computer (and the external CD-ROM drive if necessary) and insert the Install CD. Have the Installation Key Code from the front of the CoPilot CD holder ready. NOTE: Do not lose this number. You will need it for installation and registration.

Windows 95, 98, If the Installation menu does not automatically open, click on the 2000, ME: Start box and choose Run from the menu. Type your CD-ROM

drive letter, a colon, and "\setup" (example: d:\setup).

Windows NT 4.0: Choose Run from the File menu, then type your CD-ROM drive letter, a colon, and "\setup" (example: d:\setup).

Choose Install CoPilot in the panel that appears and follow the installation instructions. After CoPilot has been installed, you will be prompted to install the speech software. Click OK and follow the on-screen directions. After installation is complete, it is recommended that you install the Data to your hard drive.

You may choose to install either the East or West Data CD to save space on your hard drive. A full installation of both Data CDs requires approximately 1 GB of available space. If space in unavailable, you can run the program by inserting one of the Data CDs into your CD-ROM.

NOTE: It is not necessary to select Change POI Set during the initial installation. Use this option at a later time to change the POI set (page 18).

To start CoPilot, double-click on the CoPilot 2002 icon that was created on your desktop when you installed the program. To quit at any time, select Exit from the File menu in Planning Mode, or Quit CoPilot in Guidance Mode.

- 5 -