Sennheiser LSP 500 PRO Configuring the signal output to additional devices, Master

Page 41

The operating menu

Menu

 

Daisy Chain

Configuring the signal output to additional devices

Settings

 

 

You can send the signal of the LSP 500 PRO to one or several LSP 500 PRO – either wired via the LINK OUT XLR output or wirelessly via a transmitter installed in the SLOT 1 expansion slot. Via the LINK OUT output, you can also send the signal to an active subwoofer.

To configure the signal output:

XX In the SETTINGS menu, turn the MENU jog dial until the DAISY CHAIN menu item is displayed.

XX Press the MENU jog dial to open the DAISY CHAIN menu item.

XX Turn the MENU jog dial to choose between MASTER, SLAVE and RIGHT-L.

Option

Function

MASTER

The overall signal of the LSP 500 PRO is available as a

 

mono signal at the LINK OUT output and at the SLOT 1

 

expansion slot.

 

XX Select MASTER if you want to send the overall signal

 

of the LSP 500 PRO to one or several LSP 500 PRO –

 

either wired via the LINK OUT XLR output or wirelessly

 

via a transmitter installed in the SLOT 1 expansion

 

slot.

 

XX Select MASTER if you want to connect an active sub-

 

woofer to the LINK OUT output.

SLAVE

Only the signal of the LINK IN input is available at the

 

LINK OUT output and at the SLOT 1 expansion slot.

 

XX Select SLAVE if you want to daisy-chain several

 

LSP 500 PRO and to adjust the volume only on one

 

box (master box).

 

XX On the master box, select the MASTER option.

RIGHT-L

Right link mode: The signal of the right channel of the

 

AUX IN, BLUETOOTH and USB stereo inputs is available

 

at the LINK OUT output and at the transmitter installed

 

in SLOT 1. The box that is set to RIGHT-Lplays the left

 

stereo channel and the connected box plays the right

 

stereo channel. The mono signals of the SLOT 1, SLOT 2,

 

SLOT 3, MIC and LINK IN inputs are played on both boxes.

 

XX Select RIGHT-Lif you want to use 2 LSP 500 PRO in a

 

stereo PA system.

XX Press the MENU jog dial to activate your selection.

LSP 500 PRO 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents LSP 500 PRO LSP 500 PRO ContentContent Important safety instructions Important safety instructionsIntended use Hazard warnings on the rear of the productRisk of fire due to overloading Disposal instructions Application example LSP 500 PROPackage contents Product overview Product overviewFront view Rear view Bottom viewOperating elements Ground Lift switchOperating elements Installing the LSP 500 PRO Using the LSP 500 PROUsing the LSP 500 PRO Pole mount with tilt functionConnecting the LSP 500 PRO to the mains power supply Mains and battery operationDisconnecting the LSP 500 PRO from the mains power supply Inserting the battery packsLED Charging/replacing the battery packsReplacing battery packs during operation Important information on battery operationUsing the battery pack as signal buffer Deep discharge protectionSwitching the LSP 500 PRO on Master Volume jog Functions of the Master Volume jog dialBasic operating functions Functions of the Menu jog dialStatus area Low battery warning messagesBasic indications and functions shown on the display panel Escape function Adjusting the volumeActivating ground lift Lock modeAdditional inputs and outputs Using the LSP 500 PRO Expansion slotsConnection possibilities Opening the expansion slot Installing devices in the expansion slotsRequired accessories and tools Using the LSP 500 PRO Mounting the rack mount ears LSP 500 PRO Operating the LSP 500 PRO via a tablet Operating the LSP 500 PRO via a tabletPositioning screen Information on using the appMixing Panel screen Operating the LSP 500 PRO via a tablet Edit box screenAdjusting common settings for several boxes Compressor Operating the LSP 500 PRO via a tablet EqualizerOperating menu Operating menuMenu structure Menu Equalizer Equalizer Master EQ XX Press the Menu jog dial to store your settingsSelecting an EQ preset for an input EQ presets for the inputsSwitching an input EQ on or off Activating the low-cut filter Menu Virtual Bass Virtual BassAdjusts the compressor ratio Ratio Delay Menu USB Player USB player Playback mode Recording mode Adjusting the volume for the Bluetooth interface BluetoothPairing Bluetooth devices Test sound SettingsMaster Configuring the signal output to additional devicesImportant information on Wlan operation Display brightnessDisplaying the MAC address Switching the Wlan function of the LSP 500 PRO on or offAuto IP address Displaying and changing the IP addressIP subnet mask Displaying and changing the IP subnet maskSelected network Selecting a network and connecting the LSP 500 PRO toManually entering a network name Entering a network key Activating the phantom power Configuring the MIC inputAdjusting the input sensitivity Detecting devices in the expansion slots Audio Resetting the settingsSystem Info System information Menu ServiceUpdating the firmware Cleaning Cleaning and maintaining the LSP 500 PROCleaning and maintaining the LSP 500 PRO StorageLink in input If a problem occursIf a problem occurs Problem Possible cause Possible solution See Error and warning messages on the display of the LSP 500 PRO Specifications Temperature Specifications Power supplyRelative air humidity Compliance withAccessories AccessoriesManufacturer Declarations FCC Sennheiser electronic GmbH & Co. KG
Related manuals
Manual 1 pages 33.93 Kb

LSP 500 PRO specifications

The Sennheiser LSP 500 PRO is a versatile, portable PA system designed for professional audio applications, making it an ideal choice for events, conferences, and performances. Renowned for its exceptional sound quality and user-friendly interface, it provides flexibility and reliability for audio professionals and public speakers alike.

One of the standout features of the LSP 500 PRO is its powerful sound reproduction. Equipped with a high-performance, 2-way speaker system, the device delivers clear, rich audio with a frequency response that caters to both speech and music. With a peak power output of 125 watts, it can fill medium to large-sized venues with ease, ensuring every attendee hears the audio clearly.

The LSP 500 PRO incorporates Sennheiser’s proprietary technologies to enhance its performance. The system includes a digital sound processor that optimizes sound dispersion, ensuring that audio is delivered evenly throughout the venue. Furthermore, it features a built-in limiter that prevents distortion, safeguarding both the system and the listener’s experience.

Portability is another major selling point of the LSP 500 PRO. Weighing just 20 kg, it is designed for easy transport, featuring a sturdy handle and a lightweight yet robust construction. The system can be powered by mains electricity or through a rechargeable battery, which provides up to 12 hours of continuous use. This flexibility allows users to set up in various locations without worrying about power supply limitations.

Connectivity options are abundant with the LSP 500 PRO. It includes multiple inputs such as XLR and Jack connectors, compatible with a range of microphones and instruments. Additionally, it features Bluetooth connectivity, enabling wireless audio streaming from smartphones or tablets. The integrated mixing console allows users to adjust levels, EQ settings, and effects, facilitating a tailored sound experience for any event.

The LSP 500 PRO also supports Sennheiser’s digital wireless microphones, offering a complete audio solution for presenters or performers who require mobility. The intuitive control panel and LED display make it easy to operate, even for those who may not be tech-savvy.

In summary, the Sennheiser LSP 500 PRO stands out for its remarkable sound quality, portability, and versatile connectivity options. Whether for public speaking, musical performances, or reliable background music, this system delivers an impressive audio experience, ensuring that every voice is heard and every note is played with clarity.
Top Page Image Contents