Telenetics MOT202TSA, MOT202TRM manual Jumper S9 − RTS-CTS Delay, Jumper S10 − Carrier Detect Delay

Page 16

Configuring the Modem

Jumper S9 − RTS-CTS Delay

Settings: 8 ms (default) 33 ms

59 ms

219 ms

Jumper S9 configures the modem’s RTS-CTS delay. Four choices for selecting an RTS-CTS delay are available.

Jumper S10 − Carrier Detect Delay

Settings: 6 ms (default) 23 ms

Jumper S10 configures the modem’s Carrier Detect turn on Delay timing. The delay chosen must be consistent with the Clear To Send delay selection of the transmitting modem and must be less than the CTS delay. The available delays are 6 ms (default) and 23 ms. The carrier detect drop out is less than 6 ms.

Jumper S11 − Turnaround Squelch Time

Settings: 8 ms (default) 159 ms

Jumper S11 is used with the call turnaround squelch option (jumper S4). The available times are 8 ms (default) and 159 ms.

Page 17

Image 16

Contents

MOT202TSA/MOT202TRM Contents Leds and Controls Summary of Key Features Chapter IntroductionUsing This Manual ModelsContact Information Voice CallsIntroduction Site Preparation Installing the ModemUnpacking Your Hardware Additional Items You Need Hardware OverviewConfiguring the Modem Configuring the ModemModem Jumper Locations Jumper Settings Jumper S1 − Carrier Detect Control Jumper S2 − Transmit LevelJumper S3 − 2-wire/4-wire Mode Jumper S4 − Call Turnaround SquelchJumper S5 − Transmit Carrier Jumper S8 − Signal and Earth GroundJumper S6 − Local Copy Jumper S10 − Carrier Detect Delay Jumper S9 − RTS-CTS DelayJumper S11 − Turnaround Squelch Time Jumper S12 − Soft Carrier Turn Off Jumper S13 − Anti-StreamingConnecting to a Private Line Communication Circuit Connecting a DTEJumpers S14 and S15 − Self Test or Test Pattern Powering-on the Modem Powering-off the ModemChapter LEDs and Controls TFront Panel LEDsFront Panel Test Switch Analog Loopback Test Self Test Chapter Troubleshooting Local Modem TestLine and Modem Test Chapter Specifications TGeneralTemperature Range Dimensions and WeightPower Requirements Telco Connector DTE Connector EIA RS-232-CInterface Pin Assignments Specifications Appendix a Compliances FCC RuleDepartment of Canada Statement Appendix B Limited Product Warranty Limited Product Warranty