Telenetics MOT202TSA manual Connecting a DTE, Connecting to a Private Line Communication Circuit

Page 18

Connecting a DTE

Jumpers S14 and S15 − Self Test or Test Pattern

Settings: 1 bps

18 bps (default)

37 bps

75 bps

150 bps

Jumpers S14 and S15 configures the modem for Self Test or Test Pattern. When the modem is in local Self Test or Test Pattern mode, it generates a dot test pattern. The supported baud rates are 1 bps, 18 bps, 37 bps, 75 bps, or 150 bps.

Connecting a DTE

The modem back panel provides a standard, 25-pin port labeled DTE, which connects to an RS-232 device. The connectors for this port conform to the pin assignments shown under “DTE Connector – EIA RS-232-C” on page 29.

The DTE should have a cable no longer than 50 feet, with a Cinch or Cannon plug per DB-19604-432 plus a DB-51225-1 hood or equivalent.

Connecting to a Private Line

Communication Circuit

The modem back panel provides an 8-pin RJ-45 connector labeled TELCO, which connects to a private line communication circuit. The connectors for this port conform to the pin assignments shown under “Telco Connector” on page 29.

Connecting to an AC Power Source

The modem back panel provides an AC line cord. If the chassis ground is connected through the third prong of the AC power plug, a separate chassis ground wire is required.

Page 19

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MOT202TSA/MOT202TRM Contents Leds and Controls Summary of Key Features Chapter IntroductionUsing This Manual ModelsContact Information Voice CallsIntroduction Installing the Modem Site PreparationUnpacking Your Hardware Additional Items You Need Hardware OverviewConfiguring the Modem Configuring the ModemModem Jumper Locations Jumper Settings Jumper S1 − Carrier Detect Control Jumper S2 − Transmit LevelJumper S3 − 2-wire/4-wire Mode Jumper S4 − Call Turnaround SquelchJumper S8 − Signal and Earth Ground Jumper S5 − Transmit CarrierJumper S6 − Local Copy Jumper S9 − RTS-CTS Delay Jumper S10 − Carrier Detect DelayJumper S11 − Turnaround Squelch Time Jumper S12 − Soft Carrier Turn Off Jumper S13 − Anti-StreamingConnecting a DTE Connecting to a Private Line Communication CircuitJumpers S14 and S15 − Self Test or Test Pattern Powering-on the Modem Powering-off the ModemChapter LEDs and Controls TFront Panel LEDsFront Panel Test Switch Analog Loopback Test Self Test Chapter Troubleshooting Local Modem TestLine and Modem Test Chapter Specifications TGeneralDimensions and Weight Temperature RangePower Requirements DTE Connector EIA RS-232-C Telco ConnectorInterface Pin Assignments Specifications Appendix a Compliances FCC RuleDepartment of Canada Statement Appendix B Limited Product Warranty Limited Product Warranty

MOT202TSA, MOT202TRM specifications

Telenetics, a leading provider of telemetry and communication solutions, has introduced the MOT202TRM and MOT202TSA models, enhancing the landscape of data acquisition and remote monitoring. These devices are engineered to cater to the needs of various industries, including transportation, utility monitoring, and environmental management. Their robust design and advanced features make them indispensable tools for organizations seeking real-time data analysis and remote control capabilities.

The MOT202TRM model is primarily focused on telemetry applications, equipped with an integrated modem that supports multiple communication protocols. This versatility allows the device to operate seamlessly in diverse environments. With a wide range of supported interfaces, including serial and digital inputs, the MOT202TRM can connect effortlessly to various sensors and equipment, ensuring uninterrupted data flow. Its advanced processing capabilities guarantee quick data acquisition and transmission, making it ideal for applications that demand immediate insights and decision-making.

On the other hand, the MOT202TSA model is tailored for advanced sensor monitoring and control. Its sophisticated architecture supports not only telemetry but also extensive data logging capabilities. The device features enhanced security protocols, protecting sensitive data during transmission. The MOT202TSA supports over-the-air firmware updates, which simplifies maintenance and ensures that users benefit from the latest technological advancements without the need for physical intervention.

Both models capitalize on Telenetics' commitment to durability and reliability. They are designed to withstand harsh environmental conditions, featuring rugged enclosures that protect against dust, moisture, and extreme temperatures. This resilience makes them suitable for outdoor applications, providing peace of mind to users who require dependable performance regardless of the setting.

Another significant characteristic of the Telenetics MOT202TRM and MOT202TSA devices is their energy efficiency. Designed with low power consumption in mind, these models can operate sustainably for extended periods, making them ideal for battery-powered applications.

In conclusion, the Telenetics MOT202TRM and MOT202TSA models stand out with their advanced features, robust technology, and versatility, providing comprehensive solutions for telemetry and remote sensor monitoring. Their emphasis on durability and energy efficiency further enhances their appeal in a market that demands reliability and sustainability.
Top Page Image Contents