13.MODEM CONFIGURATION
Telenetics dial and leased line modems are based upon Rockwell chipsets. These chipsets contain Rockwell’s “AT” command set.
A summary of the Rockwell command set for your MIU modem is provided in Book 2.
Unless otherwise specified at the time of order, your modem will have left the Telenetics factory in the configuration detailed on the following pages.
The Telenetics factory configuration differs from the Rockwell default
configuration as follows...
&C0 | Rockwell Default | Carrier Detect (CD) always ON. |
&C1 | Telenetics Factory | Carrier Detect (CD) only ON |
|
| when modem connected (on hook) |
S0=0 | Rockwell Default | |
S0=1 | Telenetics Factory |
You can review the configuration of your modem by entering AT&V <CR>.
You can restore the Rockwell factory configuration by entering AT&F&W
MIU Installation, Operation & Diagnostics Edition: January 25, 1999 | Page 13 |