Tannoy V12 HP user manual Introduction, Unpacking, Connectors/Cabling

Page 4

1. Introduction

The Tannoy V12HP utilises a high performance Dual Concentric™ drive unit – the 12” (300mm) PowerDual™. The substantially increased efficiency and power handling of this all-new driver design ensures that the V12HP is capable of delivering high SPL’s in even the most demanding applications. Like all Tannoy Dual Concentric loudspeakers the Tannoy V12HP exhibits true constant directivity, providing an even frequency response over the entire area of coverage. The output capability makes the Tannoy V12HP suitable for much larger audience sizes or venues requiring very high SPL’s, such as nightclubs.

The V12HP comprises one 12inch PowerDual™ Dual Concentric™ driver in which the low frequency (LF) and high frequency (HF) sources are coincidentally aligned to a point source, resulting in a smooth uniform frequency response over a wide area of coverage either as a portable stand alone system or in a multi-cabinet array. As the system is a point source, clusters and arrays have minimal lobing. These features are inherent and achieved without the use of any electronic signal processing.

The asymmetric cabinet profile allows flexible and discreet installation. As a foreground system, installation is made simple with a range of Secur-ET mounting hardware, designed specifically for the V series – or the system can be flown using the integral M10 inserts.

For portable stage use the birch ply cabinet has a recessed carrying handle on the rear of the cabinet and a blanking plate, which can be removed to install an optional pole mount. As a versatile low profile stage monitor, the conical coverage pattern gives the performer greater freedom of movement than allowed by conventional horn loaded designs.

The V12HP has been designed for use with the Tannoy TX2 controller, which will equalise the system resulting in improved bass performance as well as providing a 2-way crossover function, operating at 100Hz, for use with separate sub-bass systems.

2. Unpacking

Every Tannoy V12HP product is carefully tested and inspected before being packaged and leaving the factory. After unpacking your loudspeaker, please inspect for any exterior physical damage, and save the carton and any relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that damage has been sustained in transit notify your dealer immediately.

3. Connectors/Cabling

The V12HP is fitted with 4-pole Neutrik Speakon™ connectors. Speakon has the following advantages over EP and XLR type connectors: All terminations are solderless; this makes life easier at the time of installation or when field servicing is required. Contacts will accept 6 sq. mm wire with an outside diameter of up to 15mm and a current rating of 30 Amps. The pins of the 2 Speakon sockets identified input/output on the rear of the input panel are paralleled within the enclosure. Tannoy has adopted the conventional wiring standard for the V12HP product :-

 

Mode Of Operation

 

Speakon Pin No.

Passive Full Range

Bi - Amp

1+

Full Range +

LF +

1-

Full Range -

LF -

2+

No Connectors

HF +

2-

No Connectors

HF -

For a worldwide list of Neutrik distributors see http://www.neutrik.com/

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Page Contents Introduction Connectors/CablingUnpacking 11.0 17.0100 17.0 35.0 11.0 22.0 14.0 Polarity Checking Crossovers Amplification & Power HandlingEqualisation V12HP ArrayingRigging & Suspension General Safety Advice Secur ET VMY Yoke Bracket Description Number on Fig Secur ET VEB Eyebolt Important It is imperative for safety reasons thatCorrect method is shown in figure Secur ET VTH Pole Mount Secur ET VCS Ceiling SaddleSecur ET VPC Pole Clamp QuantityMust be adhered to for optimum performance Delay Passive System Parameters optionalParameter Unit/Name Gain Polarity167 Warranty ML5 4TFDeclaration of Conformity EMCV12HPGH August

V12 HP specifications

The Tannoy V12 HP is a powerful and highly regarded loudspeaker, engineered to meet the demanding requirements of professional sound reproduction across various applications. This model is part of Tannoy's extensive range of high-performance monitoring speakers, combining innovative technologies with superior construction to deliver outstanding audio fidelity.

One of the most prominent features of the V12 HP is its dual concentric driver design, which is a hallmark of Tannoy products. The 12-inch mid-bass driver is perfectly integrated with a high-frequency compression driver, positioned at the acoustic center of the woofer. This design allows for a coherent soundfield and precise imaging, ensuring that even the most intricate musical details are clearly rendered.

The V12 HP is built with robust and durable materials, which not only enhance the speaker's longevity but also improve its acoustic performance. The cabinet is constructed from high-grade plywood and features a rugged finish that can withstand the rigors of professional use. Its curved cabinet shape helps to minimize resonance and distortion, leading to a cleaner and more accurate sound reproduction.

In terms of technology, the V12 HP incorporates a sophisticated crossover design. This ensures seamless integration between the low and high-frequency drivers while maintaining a linear frequency response. The crossover points are finely tuned to optimize performance across various sound frequencies, making the V12 HP suitable for both music production and live sound reinforcement.

The speaker's frequency response spans an impressive range, allowing it to reproduce low-end frequencies with power and clarity while delivering crisp and detailed highs. The V12 HP is capable of handling significant power, making it suitable for use in a variety of environments, from recording studios to auditoriums.

Connectivity is made convenient with balanced XLR and TRS inputs, providing compatibility with a wide range of audio equipment. The inclusion of a rear-panel EQ gives users the ability to make adjustments based on their specific acoustic environment, enabling a tailored listening experience.

In conclusion, the Tannoy V12 HP stands out as a versatile and high-quality loudspeaker that combines innovative design, robust build quality, and advanced audio technologies. Its unique features make it an invaluable tool for professional sound engineers, musicians, and audiophiles alike, ensuring it delivers exceptional performance across diverse sound applications.
Top Page Image Contents