Font Card Installation Guide

3.Align the top and bottom edges of the formatter board with the top and bottom track guides inside the printer (Figure 6 and Figure 7), and then carefully slide the formatter board into the printer. Hand-tighten the two thumbscrews (turn clockwise) to secure the formatter board.

Align the edge of the formatter board with the track guides, and push the board into the printer.

Figure 6

Figure 7

4.Reconnect the printer data cable and power cable. The font card installation is complete.

5.Refer to the TROY Quick-Start Guide (provided with your TROY Font Card Solution) for instructions on installing the required TROY software and support files.

NOTE: If assistance is required for installing the font card, please call TROY Technical Support at (800) 332-6427. Customers outside the United States, please call (304) 232-0899.

Document #50-70409-001 Rev. A

Page 5 of 5