TROY Group HP 9050, HP 4250 / 4350, HP 2420 / 2430 Hewlett-Packard 4250 / 4350 Printers

Font Card Installation Guide

Hewlett-Packard 4250 / 4350 Printers:

IMPORTANT: Ensure the printer power is switched OFF, and then disconnect the printer power cord from the AC wall outlet.

1.Unsnap and slide the right-rear panel toward the rear of the printer (Figure 1).

2.Open the electronics access door (Figure 2). The metal door can easily be removed by lifting the door off the hinge slots.

Open the electronics access door.

Slide panel toward rear of the printer.

Figure 1 Figure 2

3.Insert the font card into the top memory card slot (slot #2) as shown (Figures 3 and 4). The font card cannot be used in the bottom card slot. Ensure the font card is fully inserted and seated against the connector.

	Insert the font card into the top card slot.
Figure 3	Figure 4

4.Replace the printer panels, and then reconnect the printer power cord and printer data cable.

5.Refer to the TROY Quick-Start Guide (provided with your TROY Font Card Solution) for instructions on installing the required TROY software and support files.

NOTE: If assistance is required for installing the font card, please call TROY Technical Support at (800) 332-6427. Customers outside the United States, please call (304) 232-0899.

Document #50-70409-001 Rev. A Page 3 of 5