Stow Porto MIXER- Basic Engine | Stow SMC3PE, SMC3PB specs

STOW PORTO MIXER— BASIC ENGINE

Figure 5. Engine Controls and Components

INITIAL SERVICING

The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions and details of operation and servicing.The engine shown above is a Briggs and Stratton engine, operation for other types of engines may vary somewhat.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

DANGER

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT

attempt to start the engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry.

2.	Fuel Tank – Holds unleaded gasoline. For additional
	information refer to engine owner's manual.
3.	Recoil Starter (pull rope) – Manual-starting method. Pull
	the starter grip until resistance is felt, then pull briskly and
	smoothly.
4.	Oil Drain Plug – Remove this plug to remove oil from the
	engine's crankcase.
5.	Dipstick/Oil Filler Cap – Remove this cap to determine if
	the engine oil is low. Add oil through this filler port as
	recommended in Table 4.

6. Throttle Lever – Used to adjust engine RPM speed (lever advanced forward SLOW, lever back toward operator FAST).

7.Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture.

Operating the engine without an air filter, with a damaged air filter, or a

NOTEfilter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

8.Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

9. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.024 - 0.028 inch) Clean spark plug once a week.

10. Muffler - Used to reduce noise and emissions.

WARNING

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER operate the engine with the muffler removed.

PAGE 18 —STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03)

SMC3PE, SMC3PB specifications

The Stow SMC3PB and SMC3PE are cutting-edge automated storage and retrieval systems designed to optimize warehouse operations and enhance logistic efficiency. Both models belong to Stow's advanced range of modular solutions that cater to the needs of modern storage facilities.

One of the standout features of the Stow SMC3PB and SMC3PE is their impressive load capacity. The SMC3PB model is particularly well-suited for heavy-duty applications, capable of handling loads of up to 1,200 kg, while the SMC3PE excels in medium-duty tasks with a load capacity of 600 kg. This versatility makes them ideal for various industries, including automotive, electronics, and consumer goods.

In terms of technology, both models are equipped with state-of-the-art control systems that ensure seamless operation. Users can monitor and manage the systems through intuitive interfaces, allowing for easy adjustments and real-time tracking of inventory. This level of control enhances overall warehouse management, streamlining workflows and reducing errors.

The design of the Stow SMC3PB and SMC3PE also highlights user safety and accessibility. Equipped with emergency stop buttons and safety sensors, these systems prioritize the well-being of operators while maintaining efficiency. Furthermore, their modular structure allows for easy expansion, meaning businesses can grow alongside their storage needs without the need for extensive renovations.

Another key characteristic is energy efficiency. Both models utilize advanced drive technology that minimizes energy consumption during operation. This not only reduces operational costs but also supports sustainable practices, contributing to a greener future for logistics and warehousing.

The Stow SMC3PB and SMC3PE are also renowned for their reliability. Built with high-quality materials and robust construction, these systems are designed to withstand demanding environments while maintaining peak performance. The durability of these systems ensures long-term investment value for companies looking to enhance their warehousing operations.

In conclusion, the Stow SMC3PB and SMC3PE are exceptional automated storage solutions that combine strength, technology, and efficiency. Their robust features, along with user-friendly controls and energy-efficient designs, make them valuable assets for any modern storage facility seeking to optimize operations and improve inventory management. With these systems, businesses can expect elevated performance and significant returns on investment.