Stow Porto MIXER- General Information, Mixer Loading

STOW PORTO MIXER— GENERAL INFORMATION

APPLICATION

This mixer is only intended for the production of concrete and mortar. The mixer must be used for its intended purposes and is not suitable for the mixing of flammable or explosive substances. The mixer must not be used in an explosive atmosphere.

POWER PLANTS

This portable mixer is powered by either a Briggs and Stratton 4-stroke, verticle valve, single cylinder, gasoline engine rated at 3.5 hp @3,600 rpm. or a 0.75 hp electric motor.

DRUM ASSEMBLY

The drum is instantly removable by unscrewing counter- clockwise. When inserting drum onto gearbox shaft, make sure that drum is fully screwed onto shoulder or threads may be damaged. Use extreme care when screwing on the drum, spinning drum onto the gearbox shaft too fast may damage gearbox.

ELECTRICAL

If mixer is equipped with an electric motor, make sure that the power being supplied to the motor corresponds to the voltage rating label on the motor.Supplying the wrong voltage to the electric motor will cause severe electrical damage to the motor.

Always make sure that OFF/ON switch on the electric motor is in the OFF position before applying power.

It is strongly recommended that when plugging in the mixer's power cord into a receptacle, that a G.F.C.I. (Ground Fault Current Interrupter) receptacle be used.

EXTENSION CABLES

The extension cable should be a 3-wire configuration that includes a ground wire that conforms to UL code. The wire cross section must be a minimum of 2.5 mm2 . Choose an extension cord of adequate current carrying as Reference in Table 5. Remember distance affects the wire size of the extension cable.

Ensure that the extension cable is carefully laid out avoid- ing wet areas, sharp edges and locations where vehicles might run over it. Avoid allowing the extension cable to be trapped underneath the mixer.

Unroll the extension cable fully or it will overheat and could catch fire. Make sure that all extension cable connections are dry and safe. Replace any defective or badly worn ex- tension cable immediately.

PORTABLE GENERATORS

When using a portable generator it must have a minimum output of 2.5 kw and be continuous rated.

GEARBOX

The gearbox oil level has been preset at the factory prior to shipping. Before inspecting the gearbox oil level (Figures 30 and 31), make sure the gearbox is cold before removing the filler plug. Fill up with EP90. or similar gear oil.

TRANSPORTINGTHE MIXER

Use a ramp (Figure 3) to load and unload the mixer from the transport vehicle. Never drop the mixer onto the ground; damage to the mixer could result.

Figure 3. Mixer Loading

PAGE 16 —STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03)

SMC3PE, SMC3PB specifications

The Stow SMC3PB and SMC3PE are cutting-edge automated storage and retrieval systems designed to optimize warehouse operations and enhance logistic efficiency. Both models belong to Stow's advanced range of modular solutions that cater to the needs of modern storage facilities.

One of the standout features of the Stow SMC3PB and SMC3PE is their impressive load capacity. The SMC3PB model is particularly well-suited for heavy-duty applications, capable of handling loads of up to 1,200 kg, while the SMC3PE excels in medium-duty tasks with a load capacity of 600 kg. This versatility makes them ideal for various industries, including automotive, electronics, and consumer goods.

In terms of technology, both models are equipped with state-of-the-art control systems that ensure seamless operation. Users can monitor and manage the systems through intuitive interfaces, allowing for easy adjustments and real-time tracking of inventory. This level of control enhances overall warehouse management, streamlining workflows and reducing errors.

The design of the Stow SMC3PB and SMC3PE also highlights user safety and accessibility. Equipped with emergency stop buttons and safety sensors, these systems prioritize the well-being of operators while maintaining efficiency. Furthermore, their modular structure allows for easy expansion, meaning businesses can grow alongside their storage needs without the need for extensive renovations.

Another key characteristic is energy efficiency. Both models utilize advanced drive technology that minimizes energy consumption during operation. This not only reduces operational costs but also supports sustainable practices, contributing to a greener future for logistics and warehousing.

The Stow SMC3PB and SMC3PE are also renowned for their reliability. Built with high-quality materials and robust construction, these systems are designed to withstand demanding environments while maintaining peak performance. The durability of these systems ensures long-term investment value for companies looking to enhance their warehousing operations.

In conclusion, the Stow SMC3PB and SMC3PE are exceptional automated storage solutions that combine strength, technology, and efficiency. Their robust features, along with user-friendly controls and energy-efficient designs, make them valuable assets for any modern storage facility seeking to optimize operations and improve inventory management. With these systems, businesses can expect elevated performance and significant returns on investment.