SoundCraft 328 setup guide Dakota Setup Guide

Page 10

NOTE

You can force Windows applications to only playback at the chosen

samplerate by ticking the ‘Lock’ tick box in the ‘Sample Rate’ section.

 

 

 

On the Dakota, the stereo device ‘S 1:2’ (S/PDIF format) can be sourced from any physical input. In this configuration, it must be set to source from the Dakota coaxial S/PDIF input. With the

‘S 1:2’ input set to ‘Coax’, the Dakota receives the S/PDIF stream from the 328, enabling the Dakota to slave to the 328 via S/PDIF, and also allows the 328 to send S/PDIF stereo data back to the Dakota.

To make this setting, select ‘Coax’ from the ‘S 1:2’ pull-down menu.

Dakota Setup Guide

9

Image 10
Contents Setup Guide Digital 328 v2 and Frontier Design Group Dakota Setup Guide ContentsConnecting The System Audio ConnectionsOther Connections Digital 328 Setup Tape PortsPdif Input Tape Ch17-24 WordlengthPdif Output Dakota Setup Wordclock & S/PDIF Input328 can slave to the Dakota via the S/PDIF connection Dakota Setup Guide 75Ω coaxial S/PDIF cable must be used to correctly transfer Pdif Output Asio Resolution Midi Accessing The Dakota Adat I/O From Using The Dakota WithAccessing The Dakota S/PDIF I/O From Spirit by Soundcraft