SoundCraft 328 setup guide Pdif Output

Page 12

S/PDIF Output

The stereo output from the Dakota can be set to either AES/EBU or S/PDIF format. In this configuration, this should be set to S/PDIF, so that the 328 correctly interprets the stereo data incoming to the 328’s S/PDIF input.

In the Dakota Control Panel, select the ‘System’ tab. In the ‘Output Channel Status’ section, select ‘Consumer (S/PDIF)’:

Dakota Setup Guide

Image 12

Contents Setup Guide Digital 328 v2 and Frontier Design Group Dakota Setup Guide ContentsConnecting The System Audio ConnectionsOther Connections Digital 328 Setup Tape PortsPdif Input Tape Ch17-24 WordlengthPdif Output Dakota Setup Wordclock & S/PDIF Input328 can slave to the Dakota via the S/PDIF connection Dakota Setup Guide 75Ω coaxial S/PDIF cable must be used to correctly transfer Pdif Output Asio Resolution Midi Using The Dakota With Accessing The Dakota Adat I/O FromAccessing The Dakota S/PDIF I/O From Spirit by Soundcraft