SOYO SY-P41845PE, Lite Motherboard quick start Install expansion cards

SY-P4I845PE Lite Quick Start Guide

Step 4. Install expansion cards

The motherboard has 1 AGP slot and 6 PCI slots.

1.Read the instruction document of the related expansion card before inserting the expansion card into the computer.

2.Press the expansion card firmly into expansion slot in motherboard.

3.Be sure the metal contacts on the card is seated in the slot.

4.Replace the screw to secure the slot bracket of the expansion card.

5.Install related driver from the operating system.

Note1: Only AGP card with 1.5 volts can be used in this M/B. Using 3.3 volts AGP card will damage your motherboard. For AGP card voltage specification, please check the AGP card manual or contact your AGP card manufacturer.

Note2: When you use an AGP add-in card on the P4I845PE Lite mainboard the onboard VGA will automatically be disabled. It’s not possible to use onboard VGA and an AGP add-in card at the same time. For this versions (P4I845PE Lite) note that when using a PCI VGA card, make sure that the init display setting is set to PCI slot instead of onboard/AGP. Also, note that when using a PCI VGA card the on chip VGA setup option can be used to disable onboard VGA.

13

Hardware Installation