SOYO SY-P41845PE, Lite Motherboard quick start FJ1 jumper beside the AGP slot, Memory Settings

SY-P4I845PE Lite Quick Start Guide

FJ1 jumper (beside the AGP slot)

This jumper sets the default boot-up CPU frequency and the group of FSB frequencies that can be selected in the BIOS.

CPU FSB		100MHz FSB			Auto Detect FSB			133MHz FSB
					(Default)
										Hardware Installation
FJ1 Jumper
		3	2	1	3	2	1	3	2
										1
Step 2.	Configure Memory

This motherboard support PC2100 and PC2700, non-ECC and non-registered module. The largest memory capacity possible is 2GB. On this motherboard, DRAM speed can be set independent from the CPU front side bus speed. A maximum of 2 pcs.

Double-sided module can be used at the same time.

Memory Configuration Table

DDR1	DDR2	DDR3
Double sided	Double sided	None
Double sided	Single sided	None
Double sided	Single sided	Single sided
Single sided	Single sided	none

Note: System must have 533MHz FSB CPU to have PC2700 memory support.

Memory Settings

FJ1 jumper allows you to change the DRAM Frequency (DRAM multiplier) for this motherboard. This setting will have a corresponding DRAM multiplier table which can be modified by using the “DRAM: CPU multiplier “ option in the BIOS.

9