Hardware Setup |
2-2 UNPACKING THE MOTHERBOARD
When unpacking the Motherboard, check for the following items:
ØThe
ØThis Quick Start Guide *
ØThe Installation
ØOne IDE Device Flat Cable
ØOne Floppy Disk Drive Flat Cable
ØOne bracket with one
ØOne bracket with one
*If your board comes with a driver disc and a paper manual, the Quick Start Guide and the
Warning: Do not unpack the Motherboard from its anti- static packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged by electrostatic discharge. To avoid permanent damage to components ground yourself while working by using a grounding strap. Otherwise, ground yourself frequently by touching the unpainted portion of the computer chassis to drain the static charges.
Handle the Motherboard carefully, holding it by the edges. You are now ready to start the installation.
7