SOYO SY-6ZB manual Select Chipset Features Setup, Select Save & Exit Setup

Hardware Setup SY-6ZB

3. Select [CHIPSET FEATURES SETUP]

Move the cursor to the [CPU Frequency] field to set the CPU

frequency, as shown in the following display.

		ROM PCI/ISA BIOS
		SOYO COMBO SETUP
		AWARD SOFTWARE, INC.
CPU Frequency		: 350Mhz(100*3.5)	CPU Warning Temperature			: Disabled
CPU Host/PCI Clock		: 100/33MHz		System Temp.		: 24°C/75°F
CPU Ratio		: x 3.5		CPU Temperature		: 29°C/84°F
AGP Clock		: Auto		CPUFAN Speed		: 6553 RPM
				CHAFAN Speed		: 6553 RPM
				: 2.78 V	VTT(V)	: 1.50V
				3.31 V	+5 (V)	: 4.97V
				.84V	-12 (V)	: -11.45V
CPU Frequency	: 350Mhz(100*3.5)			4.88V
				In Suspend		: Enabled
CPU Host/PCI Clock	: 100/33MHz
CPU Ratio	: x 3.5				− ↓ → ← : Select Item
AGP Clock	: Auto
					PU/PD/+/- : Modify
				Values	(Shift) F2 : Color
				BIOS Defaults
			F7 : Load Setup Defaults

Available [CPU Frequency] settings on your SY-6ZB Motherboard are detailed in the following table. If you set this field to [Manual], you are then required to fill in the next two consecutive fields: (1) the CPU Host/PCI Clock, and (2) the CPU Ratio.

CPU Frequency

233MHz (66 x 3.5)	350MHz (100 x 3.5)
266MHz (66 x 4.0)	400MHz (100 x 4.0)
300MHz (66 x 4.5)	450MHz (100 x 4.5)
333MHz (66 x 5.0)	500MHz (100 x 5.0)
366MHz (66 x 5.5)	550MHz (100 x 5.5)
400MHz (66 x 6.0)	600MHz (100 x 6.0)
433MHz (66 x 6.5)

Select the working frequency of your Pentium® III, Pentium® II, Celeron™ processor among these preset values.

Note: Mark the checkbox that corresponds to the working frequency of your Pentium® III, Pentium® II, Celeron™ processor in case the CMOS configuration should be lost.

Note: if you use Bus Frequencies of 75 MHz, make sure that your PCI cards can cope with the higher PCI clock.

4. Select [SAVE & EXIT SETUP]

Press <Enter> to save the new configuration to the CMOS memory,

27