SOYO SY-7ISA+ Motherboard manual Reset, Speaker, Str Led

Hardware Installation SY-7ISA+

2.Reset

Plug the Reset push-button cable into the 2-pin Reset header on the Motherboard. Pushing the Reset button on the front panel will cause the system to restart the boot-up sequence.

Reset Pin Assignment

1

Power Good

3.Speaker

GND

Attach the 4-pin PC speaker cable from the case to the Speaker header on

the Motherboard.

Speaker Pin Assignment

+ _

+5V NC NC Speaker out

4.STR LED

The STR LED is connected to the Voltage that feeds the DIMM sockets. Therefore the following table applies:

	Suspend to RAM	Normal Operation	Power Off
STR LED	ON	ON	OFF

STR LED Pin Assignment

+ _

LED Anode LED Cathode

28