SOYO manual Setting Description IDE HDD Block Mode, Others Optional, Power on, FDC Controls

BIOS Setup Utility			SY-7ISA+
3-5.3 IDE HDD Block Mode
	Setting	Description		Note
IDE HDD Block Mode
	Disabled
	Enabled	Invokes multi-sector		Default
		transfer instead of one
		sector per transfer. Not
		all HDDs support this
		function.

3-5.4 Others Optional

	Setting			Description		Note
POWER ON
	Password			Enables you to wake-up the
Function				system by entering a password at
				the keyboard.
	HotKEY			You can wake-up the system by
				pressing the key combination of
				your choice (Ctrl-F1~F12).
	MouseLeft			Enables waking up the system by
	MouseRight			pressing either the right or left
				mouse button.
	BUTTON-ONLY			Disables the Wake-Up by		Default
				Keyboard function.
	Keyboard98
If [POWER ON Function] is set to [Password]
KB Power ON
	Enter (your		Set the password that will wake-up your
Password	password)		system.
If [POWER ON Function] is set to [Hot Key]
Hot Key Power
	Ctrl-		Choose the key combination that will wake-
ON	F1~F12		up the system. [Ctrl-F1 to Ctrl-F12]
3-5.5 FDC Controls
FDC Controls		Setting			Description	Note
Onboard FDC
		Disabled			Turn off the on-board
controller					floppy controller
		Enabled			Use the on-board floppy	Default
					controller
			71