![](/images/new-backgrounds/1298585/29858519x1.webp)
Hardware Setup |
2-2 Unpacking the Mainboard
When unpacking the mainboard, check for the following items:
ØThe
ØThis Quick Start Guide *
ØThe Installation
ØOne IDE Device Flat Cable
ØOne Floppy Disk Drive Flat Cable
*If your board comes with a driver disc and a paper manual, the Quick Start Guide and the
Warning: Do not unpack the mainboard from its
Like most electronic equipment, your mainboard may be damaged by electrostatic discharge. To avoid permanent damage to components ground yourself while working by using a grounding strap. Otherwise, ground yourself frequently by touching the unpainted portion of the computer chassis to drain the static charges.
Handle the mainboard carefully, holding it by the edges. You are now ready to start the installation.
7