SOYO SY-5EMA manual Typematic Settings Description, Rate Setting, Typematic Rate, Chars/Sec

BIOS Setup Utility			SY-5EMA
System Boot Control Settings (continued)
System Boot	Setting	Description		Note
Control Settings
Gate A20 Option	Normal
	Fast	Allows RAM access		Default
		above 1MB using the fast
		gate A20 line.

Memory Parity

Check/ ECC

Check

Enabled	This allows to perform a Default
	redundancy check on the
	parity bit in the data

strings. This method is used for error detection when the parity is not found.

Disabled

3-2.4 Typematic Settings

Typematic	Setting	Description	Note
Settings
Typematic
	Disabled		Default
Rate Setting	Enabled	Enables to adjust the
		keystroke repeat rate.
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate	6 (Char/sec)	Choose the rate at which	Default
(Chars/Sec)	8 (Char/sec)	a character is repeated
	10 (Char/sec)	when holding down a
	12 (Char/sec)	key.
	15 (Char/sec)
	20 (Char/sec)
	24 (Char/sec)
	30 (Char/sec)

Typematic Delay (Msec)

250(msec)

500(msec)

750(msec) 1000 (msec)

Choose how long after Default you press a key down the character begins

repeating.

42