SOYO SY-5EMA manual Speaker, Turbo LED, Ide Led, ATX Power On/Off Switch

Page 27

Hardware Setup

SY-5EMA

3. Speaker

Attach the 4-pin PC speaker cable from the case to the Speaker connector on the mainboard.

4. Turbo LED

Connecting the 2-pin Turbo LED cable to the corresponding Turbo LED connector will cause the LED to light whenever the system is in Turbo mode.

The manufacturer has permanently set this mainboard in Turbo mode due to most hardware and software compliance to turbo mode.

5. IDE LED

Attach the 2-pin IDE device LED cable to the corresponding IDE LED connector on the mainboard. This will cause the LED to lighten when an IDE (HDD, CD-ROM) device is active.

6. ATX Power On/Off Switch

Attach the 2-pin momentary type switch to the PWRBT connector for turning On or Off your ATX power supply.

24

Image 27

Contents Super 7TM 5EMA Serial SY-5EMAEdition September VersionTable of Contents Key Features Dram Controller KEY FeaturesCPU L2 Cache ControllerSY-5EMA Platform Features BACK-PANEL Features Handling the Mainboard Electrostatic Discharge PrecautionsHardware Setup Unpacking the Mainboard CPU Installation Installation GuideCPU Fan Installation JP4 CPU Voltage Setting JP30 & JP4CPU Voltage Setting JP30 Voltage Setting Intel P54C P100 Voltage Settings for Various ProcessorsVCORE2.9V CPU Frequency Setting SW1 Host Bus Frequency CPU Frequency Setting SW1Clock Frequency Setting SW1Ratio Bus AGP PCIFrequency Settings for AMD Processors Ratio Bus Frequency Setting Clock Setting SW1Frequency Frequency Settings for Cyrix Processors Ratio Bus Hardware SetupSY-5EMA JP8 JP9 Set JP8,JP9,JP10 for Sdram frequencyCPU BUS AGP BUS JP10 Memory Configuration Dram Module InstallationMemory configuration Table IDE Device Installation HDD, CD-ROMFloppy Drive Installation LED HDD LED Power LED & KeyLockReset Front Panel ConnectionsIDE LED ATX Power On/Off SwitchSpeaker Turbo LEDBack Panel Connections PS/2 Mouse Onboard Serial Port COM1,COM2Parallel Port PRT PS/2 KeyboardWake-On-LAN WOL Infrared IRVCC Irrx GND Irtx Chassis Cooling Fan Installation CPU Cooling Fan InstallationATX Power Supply ATX PowerSmart-Detect JP4 Setting Pay special care to the directionalityCPU Voltage Smart-Detect JP4 COM2 IRQLPT1 COM15EMA TAG RAMHardware SetupSY-5EMA Modifying selected items Selecting itemsExit Without Saving Save and Exit SetupStandard Cmos Setup Date & Time Display Setting Please NoteTime Mode Hard Disks Type & ModePrimary Setting Description Secondary Master & Slave Type Floppy Drives Setting Description Drives a & BHalt On VideoROM PCI/ISA Bios Bios Features Setup Award SOFTWARE, INC Bios Features SetupVirus Warning Setting Description Cache Memory Options Setting Description CPU Internal CacheExternal Cache SCSI, C, a Swap Floppy Drive Boot Up NumLock StatusScsi SCSI, A, CTypematic Rate Typematic Settings DescriptionRate Setting Typematic Delay MsecDRAM64MB PCI/VGABios Setup Utility ROM PCI/ISA Bios Chipset Features Setup Award SOFTWARE, INC Chipset Features SetupFP/EDO Chipset Features SetupChipset FeaturesROM PCI/ISA Bios Power Management Setup Award SOFTWARE, INC Power Management SetupPwrbtn PM Timers HDD Power Down Setting Description Doze ModeSuspend Mode VGA LPT & COMHDD & FDD IRQ3COM2, IRQ4COM1 IRQ#This option sets the mainboards PCI Slots PNP/PCI Configuration SetupAcpi I/O ConfigurationResources Controlled By DataPNP/PCI Load Bios Defaults Load Setup DefaultsIntegrated Peripherals ROM PCI/ISA Bios Integrated Peripherals Award SOFTWARE, INCIDE IDE Prefetch ModeIDE HDD Block Mode Onchip IDE SecondAskir FDC Controls Onboard FDC controller Setting DescriptionOnboard Uart HpsirParallel Port EPP Type EPP Version ECP Mode Use DMASupervisor Password User Password Enter PasswordIDE HDD Auto Detection ROM PCI/ISA Bios Cmos Setup Utility Award SOFTWARE, INCSoyo CD Start Up Program Menu Insert the Soyo CD into the CD-ROM driveDriver Installation Menu Installation procedure for Windows 95/98SY-5EMA

Related manuals

Manual 22 pages 1.66 Kb