VoIP router.
Figure
5.2 WAN Settings
The AVRO 3001 VoIP router supports 3 types of WAN connection:
•Dynamic IP
•PPPoE
•Static IP
5.2.1Dynamic IP
This mode allows the AVRO 3001 VoIP router to enable its DHCP client to get an IP address from your High Speed Service Provider. The Host Name is optional, but may be required by some High Speed Service Providers.
The default MAC address is set to the WAN’s physical interface on the AVRO 3001 VoIP router.
If required by your High Speed Service Provider, you can use the Clone MAC Address button to copy the MAC address of the Network Interface Card installed in your PC and replace the WAN MAC address with this MAC address. If necessary, you can restore the MAC address to the factory setting. (See Section 8.1)
9