SOYO SY-V6BE+ quick start Introduction, Unpacking

Page 3

SY-V6BE+Quick Start Guide

1 Introduction

Congratulations on your purchase of the SY-V6BE+Mainboard. This Quick Start Guide describes the steps for installing and setting up your new mainboard.

This guide is designed for all users to provide the basic steps of mainboard setting and operation. For further information, please refer to SY-V6BE+ Mainboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your mainboard.

Unpacking

* If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.

When unpacking the mainboard, check for the following items:

uThe SY-V6BE+ AGP/PCI Mainboard

u This Quick Start Guide

u The Installation CD-ROM

u The CPU Retention Set

u One IDE Device Flat Cable

u One Floppy Disk Drive Flat Cable

Introduction

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Quick Start Guide SY-V6BE+ Serial Version 1.0 Edition November SY-V6BE+ MainboardUnpacking IntroductionSY-V6BE+ Mainboard Layout Preparations InstallationInstall the CPU Install the MainboardSpeaker Make Connections to the MainboardCPU Cooling Fan Cpufan KeylockRAM Type Set SW1 for power up FSB clock and AGP bus clockConfigure Memory Number of Memory ModulesClear Cmos Data JP5 Enable/Disable Power-On by Keyboard JP10SY-V6BE+Quick Start Guide Select Soyo Combo Setup Quick Bios SetupSelect Standard Cmos Setup Select Load Setup DefaultSoyo CD Start Up Program Menu Soyo CDInsert the Soyo CD into the CD-ROM drive Read Soyo model name ManualManual Selection Menu Install DriversPlease select your manual In the box below and click OK BackDriver Installation Menu Soyo CD Html Database in English Enter the Soyo CDSoyo Europe Edition November VersionInternational Headquarters USA Branch Office
Top Page Image Contents