BIOS Setup Utility | SY-K7VTA PRO |
4.Cooling Fan Installation
(1) CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the 3-pin fan cable to the CPUFAN connector on the Motherboard. The fan will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.) To avoid damage to the system, install according to the following pin assignment:
CPU Cooling Fan
CPUFAN Pin Assignment
1 2 3
GND 12V SENSOR
CPU Cooling Fan
CPUFAN2 Pin Assignment
1 2 3
GND 12V NC
