BIOS Setup Utility |
|
3-5 INTEGRATED PERIPHERALS
Caution: Change these settings only if you are already familiar with the Chipset.
The [INTEGRATED PERIPHERALS] option changes the values of the chipset registers. These registers control the system options in the computer. The following screen shows setup default settings.
CMOS Setup Utility – Copyright ( C )
Integrated Peripherals
| OnChip IDE Channel0 | Enabled | 5 | ||
| OnChip IDE Channel1 | Enabled |
|
| |
| IDE Prefetch Mode | Enabled |
|
| |
| Primary Master | PIO | Auto |
|
|
| Primary Slave | PIO | Auto |
|
|
| Secondary Master PIO | Auto |
|
| |
| Secondary Slave | PIO | Auto |
|
|
| Primary Master | UDMA | Auto |
|
|
| Primary Slave | UDMA | Auto |
|
|
| Secondary Master UDMA | Auto |
|
| |
| Secondary Slave | UDMA | Auto |
|
|
| Init Display First |
| PCI Slot |
|
|
| IDE HDD Block Mode | Enabled |
|
| |
| Onboard FDD Controller | Enabled |
|
| |
| Onboard Serial Port 1 | 3F8/IRQ4 |
|
| |
| Onboard Serial Port 2 | 2F8/IRQ3 |
|
| |
| UART 2 Mode |
| Standard |
|
|
| x IR Function Duplex | Half |
|
| |
| x TX,RX inverting enable | No, Yes |
|
| |
| Onboard Parallel Port | 378/IRQ7 |
|
| |
| Onboard Parallel Mode | Normal |
|
| |
| x ECP Mode Use DMA | 3 |
|
| |
| x Parallel Port EPP Type | Epp1.9 |
|
| |
| Onboard Legacy Audio | Enabled |
|
| |
| Sound Blaster |
| Disabled |
|
|
| SB I/O Base Address | 220H |
|
| |
| SB IRQ Select |
| IRQ 5 |
|
|
| SB DMA Select |
| DMA 1 |
|
|
|
| Disabled |
|
| |
|
|
| |||
| Game Port | Enabled | 6 |
Item Help
Menu Level 4
áâàß:Move | Enter:Select | ESC:Exit | F1:General Help | |
F5:Previous Values | F7: Optimized Defaults | |||
|
|
|
|
|
69