SOYO SY-K7VEMPRO V1.0 quick start Install the Motherboard, CPU Installation

Page 7

SY-K7VEMPRO V1.0 Quick Start Guide

Install the Motherboard

To perform the installation of your new SY-K7VEMPRO V1.0 Motherboard, follow the steps below:

Step 1. CPU Installation

CPU Mount Procedure: To mount the AMD® Athlon/DuronTM processor that you have purchased separately, follow these instructions.

1

 

2

 

3

4

 

 

1.Lift the socket handle up to a vertical position.

2.Align the blunt edge of the CPU with the matching pinhole edge on the socket.

3.Seat the processor in the socket completely and without forcing.

4.Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to CPUFAN1 connector on the Motherboard. The fan is a key component that stabilizes the system. It prevents the equipment from overheating and prolongs the life of your CPU.

Hardware Installation

CPU Fan Installation

Your Socket A processor kit comes with a cooling fan. Mount the fan on the processor according to the instructions provided by the manufacturer. The fan is a key component that will ensure system stability. The fan prevents overheating, therefore prolonging the life of your CPU.

Note: Remember to connect the fan to the appropriate power source.

7

Image 7
Contents Quick Start Guide K7VEMPRO V1.0 Serial Version 1.0 Edition November SY-K7VEMPRO V1.0 MotherboardIntroduction SY-K7VEMPRO V1.0 Motherboard Layout Key Features Installation CPU Installation Install the MotherboardHardware FOC Fan-Off Control CPU FSB Setting JP3 CPU Cooling Fan CPUFAN1 Chipset Fan Chipfan Power LED / Acpi LEDConnections to the Motherboard Wake-On-LAN Header JP44Cmos Clear JP5 Select Load Optimized Defaults Select Standard Cmos FeaturesSelect Save & Exit Setup Soyo CD Start Up Program Menu Insert the Soyo CD into the CD-ROM driveInstall Drivers and Utilities  VxD Driver Driver Installation MenuVIA 4in1 Driver Package for Win 9x/ME/NT/2k/XP  Bus Master PCI IDE DriverVIA 8361 Onboard Display Driver for Win XP VIA 8361 Onboard Display Driver for WinVIA 8361 Onboard Display Driver for Win ME VIA 8361 Onboard Display Driver for Win NT4.0Check the Latest Releases Realtek LAN Driver Installation System turns on for some seconds then shutdown by itself Quick Trouble shoot tipsMy system intermittently locks up, very unstable Stability issueDuring Boot-up, my CPU speed is displayed wrong Where can I find the Bios revision of my mainboard?How can I flash the BIOS? After flashing the BIOS, my system will not boot-upCannot get the sound working on my system How can I disable the on-board Audio?SY-K7VEMPROQuick Start Guide How to contact usEditionNovember Version