SOYO SY-K7VEMPRO V1.0 quick start FOC Fan-Off Control

SY-K7VEMPRO V1.0 Quick Start Guide

4. The fans power connector should be connected to CPUFAN1.

3	CPUFAN1
1
		Hardware Installation
	DIMM1	DIMM2

Note: If the fan is defective or Power connector is not connected to CPUFAN1, the system will enable FOC function see below for more information on FOC function.

FOC ( Fan-Off Control )

The newly designed SOYO “FOC” is based on the concept of total protection for CPU, which is very different from currently seen on the market. The H/W control function is used to see a passive security system of monitoring and warning. “FOC”, designed by SOYO, gives emphasis on the concept of total protection. S/W Simultaneous Signal Follow-ups techniques and Auto Power Off System are included to prevent all possible damage caused by the MAL-functioning of the CPU fan. With the help of “O/S On Time Monitoring And Warning” function, provided by the H/W monitoring system, the double-protection purpose is achieved.

“FOC” includes the following functions:

(1) Simultaneous Signal Follow Ups: Before the system enters the O/S, H/W will detect the signals of

9