Socket Mobile 11Mbps manual Install the CF Card for Windows XP/2000/NT/98/ME

Install the CF Card for	4
Windows XP/2000/NT/98/ME

This section describes the installation of the 11Mbps Wireless LAN CF Card driver for the Windows XP/2000/NT/98/ME operating systems. The installation procedures for Windows XP refer to 4-3 Set up Wireless LAN CF Card for Windows XP; for Windows 2000 please see 4-4 Set up Wireless LAN CF Card for Windows 2000; for Windows NT please go to 4-5 Set up Wireless LAN CF Card for Windows NT; for Windows 98/ME refer to 4-6 Set up Wireless LAN CF Card for Windows 98/ME.

Note: Before you start the installation, you are advised to keep the Windows CD-ROM in case you might need certain system files.

4-1 System Requirements

In order to use the 11Mbps Wireless LAN CF Card, your computer must be equipped with the following:

1.A PCMCIA Type II slot, and a PCMCIA card and socket services compliant with revision 2.10 of the PCMCIA specification (or higher).

2.Windows 98/ME/NT/2000/XP (with a Windows installation CD-ROM, diskettes for use during installation)

3.Minimum 500 Kbytes free disk space for installing driver and utility program.

4-2 Insert the Wireless LAN CF Card

Step 1: If your PC has a compact flash type II slot, simply insert the Wireless LAN CF Card into the CF slot. If not, use the CF/PCMCIA Adapter as stated in the next procedure.

Step 2: Firmly insert the 11Mbps Wireless LAN CF Card into the CF/PCMCIA Adapter, figured as below. Then insert the 11Mbps Wireless LAN CF Card into the PCMCIA slot of your computer.

-18-

PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com