Hostname: You may change the name the SnapGear appliance knows itself by. This is not generally necessary.
Manual configuration: Select this to manually specify your SnapGear appliance’s LAN connection settings.
Skip: LAN already configured: Select this if you wish to use the SnapGear appliance’s initial network settings (IP address 192.168.0.1 and subnet mask 255.255.255.0) as a basis for your LAN settings. You may skip to the next step.
Obtain LAN IP address from a DHCP server on LAN (not generally recommended): Select this if you have an existing DHCP server that you wish to have automatically configure your SnapGear appliance’s LAN connection settings. You may skip to the next step.
Click Next.
Note: This page will only display if you previously selected Manual configuration. Otherwise skip to the next step.
Enter an IP address and Subnet mask for your SnapGear appliance’s LAN connection. You may choose to use the SnapGear appliance’s initial network settings if you are sure no other PC or network device already has the address of 192.168.0.1.
The IP address will later be used as the gateway address for the PCs on your LAN. To gain access through this gateway, the PCs on your LAN must have an IP address within the bounds of the subnet described by the SnapGear appliance’s IP address and subnet mask (e.g. using the SnapGear appliance’s initial network settings, 192.168.0.2 – 192.168.0.254).
Take note of this IP address and subnet mask, as you will need them later on.
Click Next to set up your SnapGear appliance’s Internet connection settings and connect to the Internet.
7 | 8 |