SIIG 2S manual Technical Support and Warranty

Page 11

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond.

SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below.

A)If it is within the store's return policy period, please return the product to the store where you purchased from.

B)If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510) 413-5333.

Step 2: After obtaining an RMA number, ship the product.

Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

You are responsible for the cost of shipping. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.

11

Image 11
Contents SystemRequirements Features and BenefitsIntroducing the CyberPro PCI 2S Layout PackageContentsJumper Settings JP1, JP2 Fan-out Cable Hardware InstallationWindows Driver InstallationWindows ME To Verify Windows 95/98/98SE/ME InstallationWindows98/98SE Windows2000 To Verify Windows NT 4.0 InstallationWindows NT At the Found New Hardware Wizard, insert the driver CD Bit Windows XP/ServerWindows Vista To Verify Windows 2000/XP/Server 2003 InstallationTo Verify Windows Vista Installation Windows2000/XP/Server2003/Vista Changing COM Port AddressWindows95/98/98SE/ME Blank SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc