To Verify Windows NT 4.0 Installation, Windows2000

3.Double click Multi-function adapters, SIIG CyberPro 2S PCI board and PCI Function should be displayed.

Windows NT 4.0

1.From the desktop click Start, then Run.

2.Insert the driver CD, type in D:\NT4\Install_serial.exe, then click OK. (Change D: to match your CD-ROM drive letter)

3.Click Next when the Welcome window appears.

4.Select Install, then click Next.

5.Click Yes, then click Exit.

6.Restart Windows to complete the installation.

1.Click Start, Settings, Control Panel. Double click Ports device icon.

2.Two new COM ports will be assigned when successfully installed.

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device (recommended), then click Next.

3.Check Specify a location, uncheck the other boxes, then click Next.

4.Insert the driver CD, type in D:\2000, then click OK. (Change D: to match your CD-ROM drive letter)

5.Click Next and Finish.

6.Repeat steps 1-5two more times.

7.Restart Windows to complete the installation.