SIIG 2S manual Windows98/98SE, Windows ME, To Verify Windows 95/98/98SE/ME Installation

Page 5

Windows98/98SE

1.At the Add New Hardware Wizard, click Next.

2.Select Search for the best driver for your device (Recommend), then click Next.

3.Insert the driver CD, check Specify a location, uncheck the other boxes, type in D:\9x, then click Next. (Change D: to match your CD-ROM drive letter)

4.Click Next, then Finish.

5.Repeat steps 1-4.

6.Restart Windows to complete the installation.

Windows ME

1.At the Add New Hardware Wizard, select Specify the location of the driver (Advanced), then click

Next.

2.Insert the driver CD, check Specify a location, uncheck the other box, type in D:\ME, then click Next. (Change D: to match your CD-ROM drive letter)

3.Click Next, then Finish.

4.Repeat steps 1 and 2.

5.Click Next, Next, then Finish.

6.Restart Windows to complete the installation.

To Verify Windows 95/98/98SE/ME Installation

1.Right click My Computer, click Properties, then click Device Manager.

2.Double click Ports (COM & LPT), CyberSerial PCI 16Cxxx... should be displayed two times.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SystemRequirements Features and BenefitsIntroducing the CyberPro PCI 2S Layout PackageContentsJumper Settings JP1, JP2 Fan-out Cable Hardware InstallationWindows Driver InstallationWindows ME To Verify Windows 95/98/98SE/ME InstallationWindows98/98SE Windows2000 To Verify Windows NT 4.0 InstallationWindows NT At the Found New Hardware Wizard, insert the driver CD Bit Windows XP/ServerWindows Vista To Verify Windows 2000/XP/Server 2003 InstallationTo Verify Windows Vista Installation Windows2000/XP/Server2003/Vista Changing COM Port AddressWindows95/98/98SE/ME Blank SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc
Top Page Image Contents