SIIG 2S1P manual Technical Support and Warranty, SIIG, Inc Stewart Avenue Fremont, CA 94538 RMA #

Page 11

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical support analysts will promptly respond.

A lifetime manufacturer warranty supplied with this product is offered by SIIG, Inc. Please see SIIG website for more warranty details. If you should happen to encounter any problems with this product, please follow the procedures below.

If it is within the store's return policy period, please return the product to the store where you purchased from.

If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510)413-5333.

Step 2: After obtaining an RMA number, ship the product.

Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

You are responsible for the cost of shipping the product to SIIG at the following address:

SIIG, Inc.

6078 Stewart Avenue Fremont, CA 94538 RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S and International Economy outside of the U.S at no cost to the customer.

11

Image 11
Contents SystemRequirements Features and BenefitsIntroducing the Cyber 2S1P PCI Layout PackageContentsJumper Settings JP1, JP2 Serial Port 2 Connection Hardware InstallationWindows Driver InstallationAt the Update Device Driver Wizard, click Next Double click Ports COM & LPT, Printer Port To Verify Windows 95/98/98SE/ME InstallationWindows98/98SE Windows MEWindows2000 To Verify Windows NT 4.0 InstallationWindows NT Windows Server Windows XPWindows2000/XP/Server2003 To Verify Windows 2000/XP/Server InstallationChanging COM Port Address Windows95/98/98SE/MEChanging Parallel Port Address LPT Click Settings tab, check Enable use of I/O location 278hClick Port Settings tab Blank SIIG, Inc Stewart Avenue Fremont, CA 94538 RMA # Technical Support and WarrantyAbout SIIG, Inc
Related manuals
Manual 12 pages 61.06 Kb