Changing COM Port Address, Windows95/98/98SE/ME

4.Repeat steps 1-3three more times.

5.Restart Windows to complete the installation.

To Verify Windows 2000/XP/Server 2003

1.Right click My Computer, click Manage, then select Device Manager.

2.Double click Ports (COM & LPT), two CyberSerial PCI 16Cxxx... and one CyberParallel PCI... should be displayed.

3.Double click Multifunction adapters, SIIG CyberPro 2S1P PCI board should be displayed.

Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting.

1.From the Device Manager window double click Ports (COM & LPT), then double click the CyberSerial PCI serial port you want to change.

2.Click Settings tab, at the Port Name box click the down arrow and select a COM address that is not currently in use.

3.Click OK, then click OK again to close Device Manager to save the changes. Follow steps 1-3 again to change the second serial port if needed.

1.From the Device Manager window double click Ports (COM & LPT), then double click the CyberSerial PCI... serial port you want to change.