SIIG manual AntennaConnector, RS-232 Serial

Page 3

Power Jack

Antenna

Connector

LEDs

Figure 2

AntennaConnector

The connector is a standard Reverse SMA jack. Simply connect it to a 2.0dBi, 50 Ohms impedance dipole antenna to support2.4GHzfrequency.(TheAntennaischangeable for high gain Antenna), see Figure 2.

RS-232 (Serial)

Connect the RS-232 port into the device as you would with any computer and serial device, see Figure 3.

Figure 3: RS-232

Image 3

Contents Serial Number Sticker Features and BenefitsPackageContents SystemRequirementsLED Indicators DC-In Power JackLayout RS-232 Serial AntennaConnectorSet-up Button Hardware InstallationTool Installation BT RS232 Config Tool Installation & SetupLocal Address SB-232 Config Tool Parameters ConfigurationCOM Port Device NameBaud Rate PIN CodeRole DiscoverableApply Connect Page RS-232 Pin Assignment RS-232 Wiring DiagramSIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc