Set-up Button
Set-up button
Figure 4
The purpose of the Set-up Button is for synchronizing between RS-232 to Bluetooth Converter and BT RS232 Config Tool software.
Hardware Installation
1.Connect the RS-232 to Bluetooth Converter to serial port of the PC. Connect the DC power adapter and jack into power outlet and DC-in outlet. You will see the red LED is going to be on and the green LCD will blink.
2.After running the BT RS232 Config Tool and finish configuration. Click the Connect icon in tool software and press the SET-UP button of the RS-232 to Bluetooth Converter immediately.
3.The green LED will turn on. The RS-232 to Bluetooth Converter is now active.
