SIIG RS-232 SB-232 Config Tool Parameters Configuration, COM Port, Device Name, Local Address

•SB-232 Config Tool Parameters Configuration

Figure 6

After double click the icon of BT1 as BT RS232 Config Tool, the configuration screen will be pop-up as the above picture.

A. COM Port

Select COM port number, you have to avoid port conflict with other devices in the computer, use an available port number

B. Device Name

Select device name is for identifying each device. You can follow the name by tool access or retyping the new name yourself.

C. Local Address

Localaddresswillbeautomaticallychangedafterfinishing the parameter configuration to apply.

D. Peer Address

Peer address is for two or more devices to communicate in a same network address.

6