SIIG 04-0373C specifications

Page 23

The Members tab reports the device identification (corresponding with the information in the BIOS) and the state of each device.

Besides reporting information, the Members tab of a Mirrored Set allows the user to remove a specific drive from that set. However, a drive cannot be removed from a stripe set as this would destroy all the data.

23

Image 23

Contents Serial ATA PCI RAID Features and BenefitsLayout PackageContentsSystemRequirements DeviceConnection Hardware InstallationHard disk drive connections RAID Arrays Table of ContentsFor Auto Configuration Select Auto configuration, then press EnterFor New/Blank Hard Drives For Manual ConfigurationSelect Manual configuration, then press Enter RAID 1 MirrorFor Existing Hard Drives with Data Rebuilding a Failed Mirror SetResolvingConflicts Deleting RAID ArraysWindows98SE Driver InstallationFor a New Installation Low Level FormatWindows ME For An Existing InstallationWindows2000 To Verify Windows 98SE/ME InstallationBit Windows XP/Server At the Found New Hardware Wizard Bit Windows XP/Server Select Silicon Image SiI..., then click Next To Verify 2000/XP/Server 2003 InstallationBit & 64-bit Windows Vista To Verify Windows Vista Installation For Windows Vista Installing SATARaid GUISATARaid GUI Click Run Blocked program, SATARaid Unblocking StartupFor 98SE/ME/2000/XP32-/64-bit/Server 200332-/64-bit Using SATARaid GUI Page Page Page Page Page Smtp ConfigurationMenuNotification MailDifferent levels are Event LevelAudio Log FilePopup Event Time TrayIcon and Event TableAdvancedMenu Menu CommandsRAID Wizard RAID ManagementSata RAID Help Menu Blank SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc