SIIG 04-0373C specifications Technical Support and Warranty

Page 35

Technical Support and Warranty

QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond.

SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below.

A)If it is within the store's return policy period, please return the product to the store where you purchased from.

B)If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510) 413-5333.

Step 2: After obtaining an RMA number, ship the product.

Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

You are responsible for the cost of shipping. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.

35

Image 35
Contents Serial ATA PCI RAID Features and BenefitsLayout PackageContentsSystemRequirements DeviceConnection Hardware InstallationHard disk drive connections RAID Arrays Table of ContentsFor Auto Configuration Select Auto configuration, then press EnterFor New/Blank Hard Drives For Manual ConfigurationSelect Manual configuration, then press Enter RAID 1 MirrorFor Existing Hard Drives with Data Rebuilding a Failed Mirror SetResolvingConflicts Deleting RAID ArraysWindows98SE Driver InstallationFor a New Installation Low Level FormatWindows ME For An Existing InstallationWindows2000 To Verify Windows 98SE/ME InstallationBit Windows XP/Server At the Found New Hardware Wizard Bit Windows XP/Server Select Silicon Image SiI..., then click Next To Verify 2000/XP/Server 2003 InstallationBit & 64-bit Windows Vista To Verify Windows Vista Installation For Windows Vista Installing SATARaid GUISATARaid GUI Click Run Blocked program, SATARaid Unblocking StartupFor 98SE/ME/2000/XP32-/64-bit/Server 200332-/64-bit Using SATARaid GUI Page Page Page Page Page Smtp ConfigurationMenuNotification MailDifferent levels are Event LevelAudio Log FilePopup Event Time TrayIcon and Event TableAdvancedMenu Menu CommandsRAID Wizard RAID ManagementSata RAID Help Menu Blank SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc